Cadillac 2003 Seville Owner's Manual page 300

0
Thm
,,nh;,-.ln chnm,lrl I . . . .
-ln--A
--
: A
:-
- - - - - - A : - . . l - . -
I I 16 VGI I I L I G 3 1 IUUIU
uc y1aLt.u su
I L IS
pel pel
I U I G U I ~ I
to the wall or other flat surface.
0
The vehicle should not have any snow, ice or mud
attached to it.
The vehicle should be fully assembled and all other
work stopped while headlamp aiming is being done.
full tank of fuel and one person or 160 Ibs (75 kg) on
the driver's seat.
The vehicle should be normally loaded with a
0
Tires should be properly inflated.
Start the vehicle and rock it to level the suspension.
Headlamp aiming is done with the vehicle low beam
lamps. The high beam lamps will be correctly aimed if
the low beam lamps are aimed properly.
H
If you believe your headlamps need horizontal (IefVright)
adjustment, follow the horizontal aiming procedure. If
you believe your headlamps need only vertical
jupiciownj aajustmeni, ioiiow oniy tne verticai aiming
procedure.
Adjustment screws can be turned with an E8 Torx
@
socket or T I 5 Torx screwdriver.
5-5
I