Subscribe to Our Youtube Channel
Summary of Contents for Itec 4000
- Page 1 1 Year Manufacturer’s Warranty More Information Inside Inspired TEC 4000 Air Purification System Owner’s Manual...
-
Page 2: Table Of Contents
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Records / Specifications . -
Page 3: Introduction
Introduction Copyright © 2014 Inspired TEC LLC. | All Rights Reserved elcome to the joys of cleaner air and a healthier life. You are now the owner of one of the most technologically-advanced purification systems available—the IT4000. The combination of four innovative technologies, Photo Catalytic Oxidation (PCO), Needlepoint Ionization, Scalable Purification and Electrostatic Filtration, sets the IT4000 apart from similar air purifiers on the market. -
Page 4: Records / Specifications
Consumer Information Records Inspired TEC declines all responsibility for all damages arising from improper Purchase Date: _________________________________________ use of the unit or in case of tampering with the unit. Model Number: _________________________________________ Specifications Serial Number: __________________________________________ Unit Size: 12” high x 9” wide x 12” deep Weight: 10.2 lb. -
Page 5: Warnings
Warnings Copyright © 2014 Inspired TEC LLC. | All Rights Reserved Review this list before use and performing any maintenance or cleaning of your unit. WARNING: Never operate unit near heat source, open flame or flammable/combustible fluids. WARNING: Do not operate unit unless all parts (including PCO Cell, Purification Plate, Rear Filter Assembly and Rear Cover) are properly installed. CAUTION: Directly viewing the lamp inside unit for an extended period (longer than 20 min.) may result in eye damage. -
Page 6: Features / Benefits
Features / Benefits Benefits Unlike other air purifiers, the IT4000 does more than simply filter the air in your space. Incorporating technology like photo catalytic oxidation, high level negative ionization, scalable purification and electrostatic filtration allows the air purification system to provide tangible benefits to your space by: •... - Page 7 Copyright © 2014 Inspired TEC LLC. | All Rights Reserved Four Technologies Advanced Photo Catalytic Oxidation Scalable Purification The Photo Catalytic Oxidation (PCO) Technology in the IT4000 not only destroys The system allows for adjustable purification settings in order to accommodate biological contaminates but also produces purifying plasma which eliminates the specific needs of the user at the time.
-
Page 8: Controls / Diagrams
Diagrams (Unit) Front of Unit Rear of unit Side of Unit Ionization Needle Rear Cover Screw Rear Cover Front Grille Rear Cover Clasps Unit Rear Control Panel Power Adapter Inlet Unit Front... - Page 9 Copyright © 2014 Inspired TEC LLC. | All Rights Reserved (Unit) Rear of Unit (Rear Cover Removed) Rear of Unit (Filter Assembly Removed) Power Supply Brass Thumbscrews PCO Cell Power Cord Filter Assembly PCO Cell Nuts Power Cord Plug Filter Assembly Clasps PCO Cell Connector Power Adapter Purification Plate...
- Page 10 Diagrams (Controls) Remote Control Panel POWER SLEEP PURIFIER NORMAL AWAY HIGH MODE See Owner’s Manual for complete operating instructions Power Button Power Button Purifier Level Control Purification Level Control Fan Speed Control Away Mode Toggle Normal/High Mode Control Infrared Receiver Normal/High Toggle Away Mode Control Reminder Reset Button...
- Page 11 Copyright © 2014 Inspired TEC LLC. | All Rights Reserved (Controls) Control Panel Screen Mode Specific Display NORMAL PURIFIER SETTING MUST NOT EXCEED SIZE OF AREA PURIFIER SETTING MUST NOT EXCEED SIZE OF AREA REPLACE PLATE AREA MUST BE REPLACE PCO CELL HIGH UNOCCUPIED NORMAL...
-
Page 12: Setup / Operation
Setup / Operation Initial Setup Ideal Placement Once you have determined an ideal location for your unit and calculated the area of the environment: There are several important factors to consider when selecting a location for your IT4000: Connect the Power Cord to the Power Adapter and the Power Adapter Plug into the unit. - Page 13 Copyright © 2014 Inspired TEC LLC. | All Rights Reserved Operating the Unit Turning the Unit On/Off Press the Power Button on the Control Panel or Remote to turn the unit on. The unit will initially be set to Normal Mode. Press the Power Button once more to turn the power off.
- Page 14 Setup / Operation LCD Reminders Replace Plate When “Replace Plate” appears, the Purification Plate has reached the end of its useful life and must be replaced. To order a replacement, contact your distributor or ). Once a replacement has been obtained, follow the instructions in “DISASSEMBLY/ASSEMBLY” to replace your old Purification Inspired TEC ( www.inspiredtecllc.com Plate with your new one.
-
Page 15: Disassembly/Assembly
Disassembly/Assembly Copyright © 2014 Inspired TEC LLC. | All Rights Reserved Disassembly Tools Required Removing the Purification Plate: You will need a #2 Phillips screwdriver. Grasp the Purification Plate on the ceramic and gently pull it out of the grooves on the sides. - Page 16 Disassembly/Assembly Assembly Refer to Tools & Workspace from Disassembly Section Installing the FILTER ASSEMBLY: Hold the Filter Assembly with the larger flat side (where the honeycomb Installing the FRONT GRILLE: layer of the filter is visible) facing the interior of the unit. A sticker reading, Gently put the Front Grille in place on the front of the unit, being careful “Caution: Reinstall Filter After Cleaning,”...
-
Page 17: Cleaning
Cleaning Copyright © 2014 Inspired TEC LLC. | All Rights Reserved Your unit should be cleaned monthly to be kept running at peak performance, but depending upon the pollution or odor levels present during initial setup, it is advisable to clean the unit more frequently (weekly or bi-weekly) until the environment has been treated. Cleaning the Unit (Exterior): Wipe down the exterior with a damp cloth or use compressed air or a vacuum cleaner to remove dust. -
Page 18: Troubleshooting
Troubleshooting The Unit Fails to Turn On Verify that the Power Plug is plugged into an operational wall outlet. Ensure that the Power Cord is fully inserted (leaving less than an 1/8”) to the Power Adapter. Ensure that the Power Adapter Plug is fully seated in the receptacle on the back of the unit. Verify the Power Button has been activated on the Control Panel. -
Page 19: Warranty
Limited Warranty Copyright © 2014 Inspired TEC LLC. | All Rights Reserved Your IT4000 Air Purifier is warranted to be free from all defects in material and workmanship in normal household use for a period of (1) year from date of purchase. The warranty is granted only to the original purchaser and members of his or her immediate household. - Page 20 www.inspiredtecllc.com Updated 01/26/12 v2...
Need help?
Do you have a question about the 4000 and is the answer not in the manual?
Questions and answers