Proximus v5 Installation

Installation drawing
for HD decoder
This box contains:
1 HD decoder
If all the items below are not in your box or if you need additional equipment
during the installation (wiring, etc.), contact a Proximus point of sales.
The device model may differ from the illustrations.
To ensure the Proximus TV works properly, you must first install the modem
(see modem installation guide) and then the decoder.
If the decoder replaces another decoder, you must first deactivate your current decoder. This way you can make the most of the services provided by your new device and you can also watch and record
0800 99 696
simultaneously. Call free of charge and follow the instructions. Make sure you have a recent Proximus bill at hand (you will need your customer number and your fixed line number).
More detailed information can be found at
1
Install your decoder
2 installation possibilities depending on the type of decoder
a
On the modem, plug in the gray Ethernet cable and connect it to the decoder.
b
Plug the decoder's power cord into the mains socket. Check that the switch is in the "I"
position and that the decoder's
c
The DSL indicator on the modem should be lit. Check if the
modem or the and/or
e
HD TV
Always use a HDMI cable for optimal
image quality. If you do not have an
HDMI port on your TV, use a scart cable
(available at our Proximus point of sale).
OR
HD decoder
a
d
1 remote control
with batteries
www.proximus.be/helptv
button is lit.
indicator on the b-box 3
LAN
indicators on the b-box 2 modem turn blue.
1 1 Zoom
REC HD
front of the
b
decoder
HD decoder
7 Zoom 8
REC HD
d
HDMI cable
b
HD
b
1 electric power cord
(to connect the decoder
to the socket)
d
Connect the decoder to the HD TV using the HDMI cable.
e
Switch on your TV set. The start screen automatically appears. If not, select the good
external source of your TV which the decoder is connected with the remote control of
your TV (AV1, HDMI1, EXT1, etc.).
b
mains socket
F
RADIO
power cord
N
RADIO
b
a
Ethernet cable
BACK OK MENU
front of the
decoder
1 Ethernet cable 1 HDMI cable
(to connect the decoder (to connect the decoder
to the modem) to the HD TV set)
modem b-box 3
LAN
Power
DSL
WAN
Internet
LAN
LAN
OR
WPS
On/O WI-FI
modem b-box 2
USB
a
Ethernet cable
c
front of the modem
Power
DSL
WAN
Internet
LAN
c
front of the
modem
WPS
On/O WI-FI
USB