Advertisement
Quick Links
Advertisement
Summary of Contents for Omicron Ti Series
- Page 1 User Guide User Guide check on line for the newest version of this guide. version 1.2...
- Page 2 Button time out limit - No Limit Omicron Ti Series Safety Lockout Omicron Ti Series Safety Lockout To toggle the lockout feature of the power button on your Omicron Ti Series, quickly press the power button 5 times within 3 seconds until the blue light Omicron flashes 3 times.
- Page 3 Omicron Ti User Guide Assembly Assembly he Omicron Ti Series vaporizer comes fully assembled, all you need to do is to add a fully charged battery. Fully charge the battery(s) by inserting the battery(s) in to the charger with the sign of the battery(s) facing the light on the charger.
- Page 4 Omicron Ti User Guide Omicron Ti User Guide KISS Cartridge Filling Instructions Prerequisites: ● KISS cartridges work best with stable concentrates, solid or thick and not runny at room temperature ● Non metallic applicator recommended to avoid damage to the heating coil during concentrate application ●...
- Page 5 Omicron Ti User Guide Omicron Ti User Guide KISS Cartridge Filling Instructions Load 0.1 - 0.3 grams of concentrate by dropping on to heater coil or gently apply concentrate using a non metallic applicator. Top Down View Apply Concentrate to shaded area...
- Page 6 Omicron Ti User Guide Omicron Ti User Guide KISS Cartridge Filling Instructions Screw mouthpiece holder back on to KISS cartridge main body by turning mouthpiece holder clockwise. Re-insert mouthpiece into mouthpiece holder. Mouthpiece Mouthpiece Holder Titanium KISS Cartridge UP TECH...
- Page 7 Omicron Ti User Guide Omicron Ti User Guide KISS Cartridge Filling Instructions Screw KISS cartridge onto Omicron in a clockwise direction. Omicron Ti Series KISS Cartridge Assembled KISS Cartridge UP TECH WARNING!! DO NOT overtighten cartridges. Only tighten until resistance is felt.
- Page 8 Omicron Ti Series Vaporizer ● KISS Cartridge already filled with no less than 0.1 grams and no more than 0.3 grams of extract and attached to your to your Omicron Ti Series Vaporizer Using your lungs, slowly inhale while holding down the power button for no longer than 5 seconds at a time.
-
Page 9: Maintenance Instructions
Depending on your frequency of usage, the electrical contact points should be cleaned at least once every 3 - 7 days. The Omicron Ti Series Vaporizer uses relatively low voltage to operate and even a small amount of residue on the contact points and/or threads can reduce the voltage flow, impeding the performance of your Omicron. - Page 10 My cartridge is defective, what can I do? We recommend to test every cartridge before use by connecting it to the Omicron before filling it with extracts. You can hold down the power button while looking down at the heating coil.
- Page 11 If the blue light flashes as soon as you press the button, that is either the low battery warning signal or a short condition somewhere. If your battery is depleted, remove it from the Omicron Ti Series and fully charge it before using it again. If the blue light continues to flash with a fully charged battery inserted, please contact support.
Need help?
Do you have a question about the Ti Series and is the answer not in the manual?
Questions and answers