Table of Contents
Advertisement
•
Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it also.
14.
Select a Router MAC Address radio button:
•
Use Default Address. Use the default MAC address.
•
Use Computer MAC Address. The router captures and uses the MAC address of the
computer that you are now using. You must use the one computer that the ISP allows.
•
Use This MAC Address. Enter the MAC address that you want to use.
15.
Click the Apply button.
Your settings are saved.
16.
Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see
Troubleshooting.
Specify IPv6 Internet Connections
You can set up an IPv6 Internet connection if genie does not detect it automatically.
To set up an IPv6 Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
The Basic Settings screen displays.
5.
In the Internet Connection Type list, select the IPv6 connection type:
•
If your ISP did not provide details, select IPv6 Tunnel.
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
•
If your Internet connection does not use PPPoe or DHCP, or is not fixed but is IPv6,
select Auto Config.
Your Internet service provider (ISP) can provide this information. For more information
about IPv6 Internet connection, see the following sections:
-
Use Auto Detect for an IPv6 Internet Connection
N900 WiFi Router
Specify Your Internet Settings
25
Chapter 12,
on page 26
Hide quick links:
Advertisement
Table of Contents
