Channel List; Add Channels - Magnavox 42MF439B User Manual

O
PTIONAL SETTING

Channel List

The channels selected here can be skipped when selecting the channels
+ -
].
using [CH /
Those channels can still be selected with [the Number buttons].
1
Press [MENU] to display the main menu.
2
Use [Cursor K / L] to select "SETUP", then press [OK].
3
Use [Cursor K / L] to select "Channel List", then press
[OK].
4
Use [Cursor K / L] to select the channel you want to
remove, then press [OK].
• The channel display for the removed channel
darkens. You will not be able to select the channel
+
again using [CH
• To reactivate a removed channel, use [Cursor K / L] and
press [OK]. The registered channels are highlighted.
• When you remove a main channel, its subchannels
are removed as well.
Note:
• The channel with the "DTV" indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [MENU] to exit.
20
EN
PICTURE Autoprogram
Channel List
SOUND
SETUP

Add Channels

FEATURES Antenna
LANGUAGE
USB
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
USB
PICTURE
SOUND
SETUP
High ight channels for Ch Up Down key
FEATURES
selec ion
LANGUAGE
USB
Ch Select Watch/Skip
OK
-
/ ].
Add Channels
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setting.
1
Press [MENU] to display the main menu.
2
Use [Cursor K / L] to select "SETUP", then press [OK].
3
Use [Cursor K / L] to select "Add Channels", then press
[OK].
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [OK].
DTV 11.1
DTV 11.2
DTV 11.3
BACK
Back
5
Press [MENU] to exit.
Note:
• If setup completes successfully,
"Added to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
• By using [CH
channels only.
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
USB
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
USB
PICTURE
SOUND For analog channels, select a channel to be
added using number keys.
SETUP
For digital channels, you must perform
FEATURES
Autoprogram function.
LANGUAGE
USB
Ch Change
+ -
/ ], you can select the memorized
11
Add channels
A K
Back