Reset Av Settings; Software Upgrade; Connect Accessory Devices; Set Top Box To Tv - Magnavox 42MF237S User Manual

TV menu
Installation

Reset AV settings

Language
Reset
Channels
Preferences
Connections
Clock
Reset AV settings

Software upgrade

Info

Connect Accessory Devices

1a

Set Top Box to TV

1
2
HDMI 2
AUDIO OUT
(DIGITAL)
1b Set-Top Box to TV
AV Button
3
1
2
AUDIO OUT
(DIGITAL)
Next Source
TV
AV 1
AV 2
HDMI 1
HDMI 2
Side
2
CABLE / ANTENNA
HDMI 1
Next Source
TV
AV 1
AV 2
HDMI 1
HDMI 2
Side
CABLE / ANTENNA
HDMI 2 HDMI 1
Reset AV settings
This function allows you to reset most of the picture and sound settings to
their predefined factory states.
& Select
Reset AV settings with the cursor down.
é Press the cursor right.
" Press the
button to erase settings and reset them to their default
OK
values.
Software upgrade
This menu allows you to upgrade your TV software by using a USB
device.
USB upgrade
It is possible to initiate an upgrade procedure from a USB portable
memory. The memory device must be filled with the appropriate
upgrade image (and structure) which can be found on the www.
magnavox.com/usasupport website.
Using HDMI
& Connect the RF cable from the wall to the back of the cable box.
Set the set-top box to CH 3 or 4 and tune the TV to the same channel.
In some cases, the cable box will automatically tune to channel 3 or 4. Just
change channels until the picture appears.
é Connect the cable box to the TV by using the HDMI cable.
Note : If the accessory device has DVI output only, use a DVI to HDMI adapter
cable to connect to the HDMI connector. You need to also connect the audio
cable to L and R AUDIO jacks. Next, go to Menu => TV menu =>
Installation => Connections => Audio in L/R => AV1.
Using RF Cable
& Connect the RF cable from the wall to the back of the cable box.
é Use a second RF cable to connect the cable box to the TV's antenna
input.
This connection gives mono sound. For stereo sound use also composite audio/
video connection (Refer to panel 3).
Using Component Video Input
& Connect the Component Video and Audio cable to the back of the cable
box accordingly.
é Connect the red and white audio cables from the cable box into the
audio AV inputs of the TV.
" Press the AV button on the remote control until the connected source
AV 1 appears on the TV screen.
20