Connecting A Computer; Connecting Headphones; Connecting A Digital Sound System - Insignia NS-40E560A11 User Manual

Connecting a computer

Tip
Some computers have an HDMI jack. You can use an
HDMI cable to connect the computer for a better
picture.
To connect a computer:
1 Make sure that your TV's power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable to the PC VGA jack on the
side of your TV and to the VGA jack on the
computer.
Note
The VGA cable should be a 15-pin D-Sub (analog
RGB) cable.
Back of TV
3 Connect an audio cable with stereo mini plugs
to the PC/DVI AUDIO IN jack on the side of your
TV and to the LINE OUT or AUDIO OUT jack on
the computer.
To play video from the computer:
1 Turn on your TV, then press INPUT to open the
Source List.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer and adjust the display
properties if necessary.
12
Audio cable with
stereo mini plugs
VGA cable
www.insigniaproducts.com
NS-40E560A11/NS-46E560A11- Insignia 40"/46" LED-LCD TV, 1080p

Connecting headphones

The TV speakers are muted when headphones are
attached.
Warning
Loud noise can damage your hearing. When using
headphones, use the lowest volume setting on your
headphones that still lets you hear the sound.
To connect headphones:
• Connect headphones to the HEADPHONE jack on
the side of your TV.
Back of TV

Connecting a digital sound system

To connect a digital sound system:
1 Make sure that your TV's power cord is
unplugged and the sound system is turned off.
2 Connect a digital audio cable to DIGITAL
AUDIO OUT jack on the side of your TV and to
the digital optical audio jack on the digital
sound system.
Back of TV
Digital sound system