Sony ILCE-7RM2 Instruction Manual page 83

Notes
• Use the [ Silent Shooting] function on your own responsibility, while taking
sufficient consideration to the privacy and portrait rights of the subject.
• Even if [ Silent Shooting] is set to [On], it will not be completely silent.
• Even if [ Silent Shooting] is set to [On], the operating sound of the aperture and
focus will sound.
• When shooting still images using the [
sensitivity, if you point the camera at a very bright light source, high intensity areas
on the monitor may be recorded in darker tones.
• When the power is turned off, the shutter sound may beep in rare occasions. This is
not a malfunction.
• Image distortion caused by the movement of the subject or the camera may occur.
• If you shoot images under instantaneous lightning or flickering lights, such as the
flash light from other cameras or fluorescent lighting, a striping effect may occur on
the image.
• If you want to turn off the beep that sounds when the subject is in focus or the self-
timer operates, set [Audio signals] to [Off].
• Even if [ Silent Shooting] is set to [On], the shutter sound may beep under the
following circumstances:
– [White Balance] is set to [Custom Setup]
– [Face Registration]
• You cannot select [
S/M.
• When [ Silent Shooting] is set to [On], the following functions are not available:
Cont. Shooting/Flash shooting/Auto HDR/Picture Effect/Picture Profile/Long
Exposure NR/e-Front Curtain Shut./S. Auto Img. Extract./BULB shooting/Multi
Frame NR
• When shooting using a function downloaded from PlayMemories Camera Apps,
[ Silent Shooting] is canceled.
• The minimum value for ISO sensitivity is ISO 100.
• After you turn the camera on, the time in which you can start recording is extended
by 0.5 seconds.
Silent Shooting] function with low ISO
Silent Shooting] when the mode dial is set to other than P/A/
Using the various functions
GB
83