Predator 62323 Owner's Manual & Safety Instructions

212cc chipper/shredder

Hide thumbs

Table Of Contents

Owner's Manual & Safety Instructions

Save This Manual

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

Using an engine indoors

CAN KILL YOU IN MINUTES.

Engine exhaust contains carbon monoxide.

This is a poison you cannot see or smell.

NEVER use inside

a home or garage,

EVEN IF doors and

windows are open.

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

REV 14l

Email our engine support at: predator@harborfreight.com

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2014 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Keep this manual for the safety warnings and precautions, assembly,

Only use OUTSIDE

and far away from

windows, doors,

and vents.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

ITEM 62323

Table of Contents

Summary of Contents for Predator 62323

Page 1 ITEM 62323 Email our technical support at: productsupport@harborfreight.com REV 14l Email our engine support at: predator@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Page 2: Table Of Contents
1740 ± 50 RPM The emissions control system for this Engine is warranted for standards set by the U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual. Page 2 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 3: Safety
Specifications chart of this manual. can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 3...
Page 4 This may prevent balance at all times. This enables better control proper discharge and can result in kickback of the equipment in unexpected situations. of material through the feed Hopper. Page 4 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 5 To prevent FIRE, do not start the engine about your ability to perform safely or correctly. while the smell of fuel hangs in the air. 7. Store equipment out of the reach of children. SAVE THESE INSTRUCTIONS. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 5...
Page 6: Setup
Bolts (6) and Nylon Lock Nuts (5). Refer to Figure B. 5. To attach the Discharge Bag (56), lift the Discharge Port Cover (22) and attach the Bag onto the discharge port using the rope tie. Figure B Page 6 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 7 Components and Controls Fuel Cap Muffler Chipper Chute Filter Engine Switch Choke Starter Handle Throttle Oil Cap/ Dipstick Fuel Valve Oil Drain plug Handle Hopper Access panel Wheel Locks ITEM 62323 For technical questions, please call 1-888-866-5797. Page 7...
Page 8 Fuel Cup Seal part Description Main Jet 3000-6000 ft. Mixing Tube Main Jet 6000-8000 ft. (might remain Bolt Seal inside carburetor) Fuel Cup Seal Main Jet Fuel Cup Bolt Seal Bolt Page 8 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 9: Operation
6. Thread the dipstick back in clockwise. NOTICE: Do not run the engine with too little oil. The engine will be permanently damaged. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 9...
Page 10: Wheels
Clean debris from discharge area — e ngine will not start if discharge area is jammed. d. Engage the Wheel Locks on both wheels to prevent Chipper/Shredder movement during use. Page 10 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 11: Speed
Repeat until the engine starts. Note: Do not let the Starter Handle snap back against the engine. Hold it as it recoils so it doesn't hit the engine. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 11...
Page 12: Engine Oil
Engine. Wait until the machine completely stops. Disconnect Figure C the Spark Plug. Clear the jam in the machine by shifting the material with a long stick. Then, resume operation. Page 12 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 13: Spark Plug
2. Store the Chipper/Shredder in a dry indoor location that does not allow access by children. Figure D: Fastener Locations NOTICE See Long-Term Storage on page 17 for complete storage instructions. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 13...
Page 14: Maintenance
4. Clean carbon build-up from combustion chamber Replace fuel line if necessary Service more frequently when used in dusty areas. These items should be serviced by a qualified technician. Page 14 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 15 10W-30 5W-30 100°F Average outdoor temperature 8. Thread the dipstick back in clockwise. NOTICE: Do not run the engine with too little oil. The engine will be permanently damaged. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 15...
Page 16 If overtightened, the threads in the engine block will be damaged. 6. Apply dielectric spark plug boot protector (not included) to the end of the spark plug and reattach the wire securely. Page 16 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 17 Change engine oil. if treated gasoline has been sitting beyond the fuel stabilizer’s recommended time period, or if the engine does not start. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 17...
Page 18: Troubleshooting
4. Engine valves or tappets 4. Have qualified technician adjust/ mis-adjusted or stuck. repair valves and tappets. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. Page 18 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 19 2. Hammers loose, damaged, 2. Have qualified technician or obstructed by debris. service Chipper/Shredder. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 19...
Page 20: Please Read The Following Carefully
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 20 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 21 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 21...
Page 22: Parts Lists And Diagrams
Shock Absorber Washer Ø12 Flat Washer Ø8 Lock Washer Ø8 Bolt M8 x 16 Socket Head Cap Screw M8 x 50 Discharge Bag Flat Washer Ø8 Hopper Gasket Long Spacer Bushing Page 22 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 23 Main Assembly Diagram ITEM 62323 For technical questions, please call 1-888-866-5797. Page 23...
Page 24 Valve Adjusting Bolt Clamp Valve Rocker Arm 100A Fuel Steam Rubber Hose When ordering replacement parts from this list, the “A” suffix must be included in order to get the correct part. Page 24 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 25 Engine Assembly Diagram ITEM 62323 For technical questions, please call 1-888-866-5797. Page 25...
Page 26: Warranties
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Page 26 For technical questions, please call 1-888-866-5797. ITEM 62323...
Page 27 HFT. For emissions warranty service, contact the HFT Customer Service Department at 1-888-866-5797. ITEM 62323 For technical questions, please call 1-888-866-5797. Page 27...
Page 28 3491 Mission Oaks Blvd. • pO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797...