Table of Contents
Advertisement
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 47.
2
3
48
48
EN
EN
4
8
6
1
1
Turn on the TV and press
[STANDBY-ON y y ], and be sure to
select the input of the TV to which
the unit is connected.
2
Press [OPEN/CLOSE A] to open the
disc tray. Place the disc to record
properly.
3
Press [OPEN/CLOSE A] to close the
disc tray.
It takes a while to load
the disc.
4
Select the appropriate external input
channel (L1 or L2) by pressing
[SOURCE] or [CHANNEL
• If the external device is connected to the rear
of this unit, select L1.
• If the external device is connected to the front
of this unit, select L2.
• You can also select L1 or L2 channel by using
[the Number buttons].
e.g.) For L1, press [0], [0], [1].
5
Press [REC MODE] repeatedly to
select a recording mode.
Refer to "Recording Mode" on page 31.
HQ
SP
(1Hr)
(2Hr)
(2.5Hr)
6
Press [I RECORD] on the unit to start
recording.
7
Start playback on the external device
to record from.
8
Press [C STOP] on the unit to stop
recording.
This operation may take a
while to be completed.
/
].
LP
EP
SLP
SPP
(3Hr)
(4Hr)
(6Hr)
Advertisement
Table of Contents
