Auto Function Change - LG LAP250H Owner's Manual

Auto power down
This unit will be off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 20
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input. (Ex Portable, etc..)
How to disconnect the wireless
network connection or the wireless
device
Set up the AUTO POWER function to off and turn
off the unit.

Auto function change

This unit recognizes input signals such as optical,
Bluetooth and LG TV and then changes suitable
function automatically.
When optical signal comes in
When you turn on the external device connected
to this unit by an optical cable, this unit change the
function to optical. You can hear the sound from
your device.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV signal comes in
When you turn on your LG TV connected by
LG Sound Sync (Wireless connection), this unit
changes the function to LG TV. You can hear the
sound from your TV.
,
Note
y To change to optical function, it needs 5
seconds of no signal.
y This unit does not change the function to
optical if SIMPLINK of the connected TV, Blu-
ray disc player, set-top box or etc. device set
to on or connected CEC supported device is
turned on.
y If you want to use the auto function change,
SIMPLINK must be turned off. It takes for
about 30 seconds to turn off SIMPLINK.
Operating 23
3