1. Manuals
  2. Brands
  3. Sonarray Manuals
  4. Speakers
  5. SR1
  6. Instruction manual

Sonarray SR1 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
S O N A R R AY S R 1 S Y S T E M I N S T R U C T I O N M A N UA L

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sonarray SR1

  • Page 1 S O N A R R AY S R 1 S Y S T E M I N S T R U C T I O N M A N UA L...

  • Page 2: Box Contents

    Satellite Speaker In-Ground Subwoofer Speaker Layout Planning The SONARRAY SR1 SYSTEM is designed to deliver a seamless, The satellites in the SONARRAY SR1 SYSTEM individually present evenly dispersed sound field in an ‘open air’ environment. An a 30 ohm load to the amplifier. When 4 of them are connected...

  • Page 3: Speaker Installation

    DISTANCE Connecting the Speakers 18 Gauge Up to 100 Feet (33 meters) The SONARRAY SR1 SYSTEM allows the satellite speakers to 16 Gauge Up to 150 Feet (50 meters) be wired together in a parallel-daisy chain configuration. In a typical system with one zone of audio, simply run a 4 conductor...
  • Page 4 S O N A R R AY S R 1 S Y S T E M I N S T R U C T I O N M A N UA L Recommended tools you will need Satellite Wire Connection Wire Strippers that will accommodate up to Connecting the speakers using 14/4 direct burial 12 gauge wire.
  • Page 5 Use a wire tie to keep the wire loop intact and act as a Strip off 1 inch (25.4mm) of insulation on Red and Black wires strain relief. to expose the copper conductor. Combine and twist the Red wires from the amplifier, the first satellite and the wire run running to the next speaker in a clock-wise motion.
  • Page 6 S O N A R R AY S R 1 S Y S T E M I N S T R U C T I O N M A N UA L Repeat steps 6 & 7 for the black wires. Cut the wire at the last speaker location in the daisy-chain.
  • Page 7 Subwoofer Wire Connection After all satellites and subwoofer connections are completed, connect the wires to your receiver or amplifier. See Figure 4 for The subwoofer features a dual voice coil driver with 4 wires, one reference. pair for each of the amplifier channels. Red (+) and Black (-) are used for the right channel, White (+) and Green (-) for the Left IMPORTANT: Be sure not to let any stray’+’...
  • Page 8 FITNESS FOR USE, AND IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. No one is authorized to make or modify any warranties on behalf of SONARRAY. The warranty stated above is the sole and exclusive remedy and SONARRAY’s performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product.

Table of Contents