Denon AVR-X4200W Owner's Manual page 141

Contents Connections
Adjusting the volume of each channel
to match the input source (Channel
Level Adjust)
The volume of each channel can be changed while listening to music. You
can set this for each input source.
1
Press OPTION.
The option menu screen is displayed.
2
Use ui to select "Channel Level Adjust", then press
ENTER.
The "Channel Level Adjust" screen is displayed.
3
Use ui to select the channel that you wish to adjust.
4
Use o p to adjust the volume.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
5
Use uio p to select "Exit", then press ENTER.
Front panel Display
Playback Settings
0 Select "Reset" and press ENTER if you want to restore the adjustment values of
the various channels to "0.0 dB" (default).
0 Headphone volume can be adjusted when a headphone is connected.
0 "Channel Level Adjust" settings are stored for each input source.
0 You can only set this for speakers that output audio. In addition, you cannot set
this when in the menu "HDMI Audio Out" is set to "TV". (v p. 204)
141
Rear panel
Tips
Remote Index
Appendix