Swimovate PoolMatePro User Manual

Welcome to the PoolMatePro User Manual
Adjusts settings and
Scrolls through top
features to display
line functions
Short press- Start
Hold 2 secs- Stop/exit
Hold for Backlight
current menu
Infra red link to pod
Quick Start
When using the PoolMatePro for the first time the pool
length, your weight and the hand you wear the
PoolMatePro on, must first be set. The default settings are
25m, 65KG and left handed.
From main CLOCK screen
Press Mode 4 times to show SETUP, select by pressing Start.
Set watch from metric to imperial units if required by pressing
Up/Down.
Set Pool length by pressing Up/Down until correct value is
shown.
Press Mode 3 times to set your weight (again use Up/Down
select correct value).
Press Mode once to set left or right hand (use Up to select).
Hold Start for 2 secs to return to main menu and Mode to return
to CLOCK screen.
You are now ready to Swim!
Swimming
Press Start to begin
?
Swim your session
?
Hold Start for 2 seconds to stop.
?
Press Up and Down to view Laps,
Strokes, Distance, Calories, Efficiency
Index and Time.
To record sets:
Press Start - swim first set
?
Press Start to Pause (a P will appear at the start of the
?
bottom line and the time for your last set will remain for 3
seconds the reset so you can time your rest period).
Press Start again to Restart - swim next set.
?
Repeat as required
?
Hold Start for 2 secs to Stop
?
The PoolMatePro must be put into Pause Mode when drilling
or kicking.
To conserve battery life, if the watch has NOT been PAUSED
and no laps have been detected for 5 minutes, the watch will
stop recording and return to CLOCK screen.
Contents:
PoolMatePro watch
USB pod
USB lead
Instruction manual
Quickstart/overview guide
CLOCK SETUP
x4
to
x3
change to
change pool
change body
yards and lbs
length
weight
CLOCK
SWIMMING
Use Mode to view
Elapsed time and
Actual time whilst
swimming
PAUSED
Selecting your settings
CLOCK
x4
1
select hand
watch is
worn on
*Changing swimmer: The PoolMatePro has been designed so up to to 3 swimmers can share one watch or families with more than one watch can use
change
the same PC to analyse their swims. In either case each swimmer should be assigned a number (1, 2, or 3). The swimmer should set the assigned
hand number on the watch in the SETUP menu before swimming and change his weight.

Setting the Time

2
Use Up/Down to scroll
through Laps, Strokes,
Distance, Calories,
Efficiency and Set number
change
value
SETUP
From main CLOCK screen, press
SETUP.
Use Mode
or imperial units, Pool Length, Time Set, Alarm Set, Weight,
Left/Right Hand, Reset, Battery level and User number.
Use Up
Hold Start
Will show Y for
Yards if set to
imperial units
TIME SET
menu
change to change pool
yards and lbs length
Battery level indicator
Shows number from
1(low) to 6 (high).
CAUTION Activating the Reset function will erase the
hold Up 2 secs
Pro 's memory and delete all stored data files. User settings for all
to reset factory
functions will be replaced with the factory settings your
values and clear
Pro was shipped with.
data
4

Setting the Alarm

From TIME SET in the SETUP menu
Press Start - the hours will flash on the
clock display, press Up and Down to
change value. Press Mode to select
minutes, pressing Mode again will select
Year, then month, then date, then 12/24
hour setting, press Up and Down to
change values as before.
Hold Start for 2 secs to return to SETUP.
Hold Start again for 2 secs to return to
main menu.
select Hours,
Minutes,Year,
Month,Date
12/24hr
hold for 2
secs to
Hold
EXIT
3
Mode 4 times to show
Press Start
to scroll through watch settings- Choose metric
and Down to change value
for 2 secs to return to menu
Will show lbs instead of
KG if set to imperial units
ALARM SET
menu
change body
weight
TIP: Hold Start for 2
secs at any time to
EXIT or return you
Hold
to the main menu
for that function
change
swimmer *
PoolMate
Pool-Mate
5
From ALARM SET in the SETUP menu
Press Start - the hours will flash on the
clock display, press Up and Down to
change value. Press Mode to select
minutes, pressing Mode again selects on
or off . Press Up and Down to change
value as before.
Hold Start for 2 secs to return to SETUP.
Hold Start again for 2 secs to return to
main menu.
select Hours,
Minutes,
on/off
Setting the Alarm to ON activates the
bell icon, above seconds on the
display.
The alarm will sound each day at the
set time for one minute or until Mode
change
is pressed.
value