Cleaning The Condenser - Beko DCY 7402 GXB2 User Manual

Maintenance and cleaning

6.4 Cleaning the condenser;

Hot and humid air in the condenser is cooled with the
cold air from the room. Thus, the humid air circulating in
your dryer is condensed and then pumped into the tank.
C
Clean the condenser after every 30 drying
cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out, open the
door of the machine and wait until it cools down.
2. Unlock the 2 condenser locks after opening the kick
plate.
3. Pull out the condenser.
Dryer / User Manual
4. Clean the condenser by applying pressurized water
with a shower armature and wait until the water
drains.
5. Place the condenser in its housing. Fasten the 2 locks
and make sure that they are seated securely.
6. Close the kick plate cover.
25 / 28 EN