Quick Start - Magnavox MTV-34, MTV-51, MTV-68 Use And Care Manual

NB:- For connection of Television directly to Wall
socket or indoor antenna Only. For connection to other
equipment such as VCR etc refer to page 7.
1 Carefully Unpack your Magnavox television, ensuring
the following items are present:-
• Instruction Booklet
• Magnavox Hotline Number
• Remote Control
• AA size batteries for remote Control
• Magnavox Product Flyer/Brochure
• 75 Ohm antenna Lead
2 Carefully remove electrostatic sticker from
television screen.
3 Read through the instruction booklet and familiarise
yourself with the operation of the product.
4 Connect the antenna lead supplied to the aerial
terminal located on the back panel of the television
set (refer page 6 'Locations Of Controls') and
the other end to the aerial wall socket in your
home. If using an indoor antenna plug this directly
into the aerial terminal located on the back panel of
the television (refer page 6 'Locations of Controls').
5 Connect your Magnavox Colour Television to the
power outlet and switch on television.
6 Your Magnavox television will now commence tuning
automatically. ('Out of Box' Tuning).
NB:- This function will automatically store the TV
channels from 0 position in numerical sequence. If you
wish to set the correct stations on the corresponding
channels see ' Channel Position' on page 9.
This Magnavox product is equipped with a unique
feature called 'Out of Box' tuning. However your
Magnavox television will only perform 'out of Box
tuning' once upon initial start up. To carry out any
further tuning or fine tuning, please refer to pages
8 & 9 'Basic Operation'.
2

QUICK START

2
4
5
6 Auto Search