Configuring Key Repeat Time - Samsung S22E390H User Manual

6
Setup and Reset
6.5 Key Repeat Time
Control the response rate of a button when the button is pressed.
The functions available on the monitor may vary depending on the model. Refer to the actual product.

6.5.1 Configuring Key Repeat Time

1
When the Function Key Guide appears, select [
Next, press the JOG button.
2
Move to SETUP&RESET
3
Move to Key Repeat Time
The following screen will appear.
Acceleration,

only once when a button is pressed.
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.
controlling the JOG button UP/DOWN and press the JOG button.
controlling the JOG button UP/DOWN and press the JOG button.
SETUP&RESET
Reset All
Eco Saving Plus
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Power LED On
1 sec, or 2 sec can be selected. If
] by moving the JOG button UP.
Configure the
response rate of a
button when the button
Off
is pressed.
Acceleration
1 sec
Acceleration
2 sec
Auto
No Repeat
No Repeat is selected, a command responds
65
6 Setup and Reset