Block Channels - Magnavox 20MT4405 User Manual

A A
fter your personal access code has been sent (see previous page), you are now ready to select the channels or the
A/V inputs you want to block out or censor. Once you've entered your access code and the SmartLock features are
displayed on the screen :
1
Press the CURSOR < or > until the words
BLOCK CHANNELS are highlighted.
2
Press CURSOR > to turn blocking ON or OFF
for that channel. When ON is selected the channel
will be blocked.
3
Press CH+ or CH- to select other channels
you wish to block. Repeat step 2 to block the
new channel.
4
To Unblock a channel, use the CH+ or CH- to scroll
to the channel you wish to unblock. The screen
will show a message telling you that the channel has
been blocked by SmartLock and you have to Enter
your Access Code to unblock the channel.
5
Use the NUMBER Buttons, key in your Access Code.
The Blocked channel will be UnBlocked.
6
When finished, press the STATUS / EXIT button
on the remote control to remove the menu from
the screen.
NOTE : If you forget your code, key 0 7 1 1. This is the
factory def factory default factory default . Enter this code to create a new access
code.

BLOCK CHANNELS

Block Channel
STATUS / EXIT
MENU
23
SmartLock
Block Channel OffStop Time
Setup Code Channel
Clear All Activate
Block All Display
Movie Rating
TV Rating
On
Access Code to
Channel 12
view a tuned
Blocked By SmartLock
channel that is
Channel Blocking
Access Code
blocked with
- - - -
Block Channel.
CC
A/CH
STATUS
EXIT
< >
SLEEP MUTE
Enter your