Advertisement
Getting Started
Before using your SHERPA UI for the first time, activate
your warranty by following these simple steps.
1. Activate your warranty by registering your GOALØ gear
at http://www.goal0.com/warranty
2. Connect the SHERPA UI to your power pack via the
SHERPA power pack's chaining cable.
3. Select the correct voltage (110 or 220) from the back
of the SHERPA UI.
4. Make sure your SHERPA power pack is fully charged
and turn it on.
5. Turn on the SHERPA UI.
6. Confirm that the correct voltage is selected from the
light indicators at the front of the SHERPA UI.
You are now ready to power your AC device!
Hint: The unique design of the SHERPA UI's outlet can
accept all popular Western, European and Asian AC
plugs. In the US the standard is 110. Make sure that you
select the correct voltage for your device.
Advertisement
