Vizio SS2521-C6 Quick Start Manual page 13

7
Turn your TV on, the Sound Stand will
automatically turn on and begin searching for an
active input.
The LED indicators on the front of the Sound Stand
will begin cycling in pairs through inputs until an
audio source is detected.*
Tip: Pressing the INPUT button will
stop the auto detect function.
You can press the Input button to switch between
audio sources. For example, if you connected your
TV to Input 1, set the Sound Stand to Input 1.
Hardware setup is complete.
* Auto detect function only occurs once when Sound Stand is first powered on. To enable this
feature again, you must do a Factory Reset or Press and hold the INPUT button on the remote
control for 5 seconds to enable the auto input detect function.
Input
13
Power