Doing so may result in the unit falling shock. down, causing personal injury and/or property damage. ProjectMix10...
Page 4
10 days or more. Doing otherwise may cause a fire or electric shock. An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building. ProjectMix10...
2. GENERAL DESCRIPTION The ProjectMix10 series is equiped with pre-amplifier. They are designed to suit all PA system application in schools. Home.offices and stores. 3. FEATURES 1. CHIME SIGNAL Selective two tone/four tone chime(Internal setting) 2 Automatic priority 3 Permissible external chime remote and p.t.t remote 2.
LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL LINE LINE LINE LINE LINE LINE LINE LINE LINE VOLUME PROJECTMix10 OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT PRIORITY2 HIGH PRIORITY3 1 1+2 2 SIGNAL 1 1+2 2...
FUSE 230VAC 24V MAX 0.6A SERIAL NO: PUBLIC ADDRESS SYSTEM PRE AMPLIFIER MODEL NO: ProjectMix10 8. AC POWER 13.MIC/LINE INPUT 2~6 Be sure to check AC voltage. Use MIC/LINE balanced input can be selected by mode switch in the front fuse approved.
6. SPECIFICATIONS MODEL ProjectMix10 MIC/LINE: -5dBu(2.45mV)/5Kohms BAL -10dBu(245mV)/5Kohms BAL INPUT SENSITIVITY/IMPEDANCE LINE RCA IN:-10dBu(245mV)/10Kohms UNBAL MASTER 1,2:NOR +4dBu(21.23V)/200ohms BAL OUTPUT LEVEL/IMPEDANCE REC: NOR 0dBu(0.775mV)/10K UNBAL MASTER 1,2:NOR +4dBu(21.23V)/200ohms BAL OUTPUT LEVEL/IMPEDANCE REC: NOR 0dBu(0.775mV)/10K UNBAL Less Than -0.5dB(20Hz~20KHz) FREQUENCY RESPONSE...
CHIME REMOTE INSIDE AC/DC DC POWER P.T.T 1 P.T.T 1 FUSE 230VAC 24V MAX 0.6A PUBLIC ADDRESS SYSTEM PRE AMPLIFIER MODEL NO: ProjectMix10 SERIAL NO: UNIT :mm MASTER 1 POWER CHIME -PAGEMIC 1 CH 2 CH 3 CH 4 CH 5...
Page 12
PUBLIC ADDRESS SYSTEM 2009-11 Version1.0...