KneeRover Evolution User Manual

TM
KneeRover
User Manual
Evolution Scooter
Congratulations on your purchase of the KneeRover
Evolution Scooter!
The versatile KneeRover Evolution seated scooter provides a
TM
new level of freedom to users recovering from knee or leg injuries.
The large gel padded seat and convenient front leg stand allows
the patient to rest in comfort while elevating the non-weight
bearing leg. Increase your mobility without the use of painful
crutches.

Operating Instructions:

This KneeRover scooter is designed to maximize mobility during your
TM
recovery from foot/ leg surgery or injury.
It is important to set the seat and handlebar at a comfortable and safe
operating position. The best position for the handlebar is approximately
at hip level, with the seat at a comfortable height for propelling the
KneeRover scooter and resting your injured leg.
TM
Ensure that the hand brake is fully engaged and locked before mounting
the KneeRover scooter. Place your hands on the handgrips and while
TM
seated, place the heel of the injured leg on the leg rest. Now release the
parking brake and propel yourself using your good leg. Allow the
KneeRover scooter to glide, and as it slows down, push again.
TM

Safety First:

The KneeRover Evolution scooter is designed for easy steering and
TM
stopping and should be used to carefully move about at slow, controlled
speeds. When turning the scooter, you should have the brake applied
and be moving at a slow, safe, controlled speed. It is easy to tip the
scooter if you are making a turn with too much speed. Use caution and
balance and operate at your own risk.
With routine use, nuts and bolts on the steering column and brake
mechanism can and likely will become loose. Periodically check nuts and
bolts after use and re-tighten as appropriate.
TM