Philips AZ202517 User Manual page 14

XP AZ 2025/17.1 08-05-2000 16:10
AZ 2025 /17 14
page
CD PLAYER
Programming track numbers
In the STOP position, select and store your CD tracks in the desired
sequence. If you like, store any track more than once. Up to 20
tracks can be stored in the memory.
1. Use the SEARCH ∞ or § on the set, (on the remote control ¡
or ™) to select your desired track number.
2. Press PROGRAM.
™ Display: PROGRAM and the selected track number P ro g
appears briefly.
™ If you attempt to program without first selecting a track number,
no SEL or no P ro g scrolls across the display.
3. Repeat steps 1-2 to select and store all desired tracks.
™ FULL is displayed if you attempt to program more than
20 tracks.
4. To start playback of your CD program, press
PLAY•PAUSE 2; (on the remote control 2;).
Reviewing the program
In the STOP position or during playback, press and hold down
PROGRAM for a while until the display shows all your stored
track numbers in sequence.
Erasing a program
You can erase the program by:
– pressing STOP 9 once in the STOP position or twice during
playback.
• no P ro g scrolls across the display briefly and PROGRAM
disappears.
– you select another source: TAPE / TUNER.
14
Pagina 14