Key Fob Arming And Disarming; Key Fob Arming To Stay Mode; Key Fob Arming To Away Mode; Key Fob Disarming - Vivint Go!Control User Manual

Burglary Protection

Key Fob Arming and Disarming

Your system may be equipped with one or more wireless key fobs.
Up to eight key fobs can be used to control the system remotely.
Each key fob has four buttons and can perform fi ve functions. A User
Code is not required when arming or disarming the system with a
wireless key fob.
There are several key fob options that can be set by the installer.
Check the options that apply.
• Have key fob arm without an Entry Delay.
❑ Fob #1 ❑ Fob #2 ❑ Fob #3 ❑ Fob #4 ❑ Fob #5 ❑ Fob #6 ❑ Fob #7 ❑ Fob #8
• Allow key fob disarming.
❑ Fob #1 ❑ Fob #2 ❑ Fob #3 ❑ Fob #4 ❑ Fob #5 ❑ Fob #6 ❑ Fob #7 ❑ Fob #8
• Enable key fob auxiliary key.
❑ Fob #1 ❑ Fob #2 ❑ Fob #3 ❑ Fob #4 ❑ Fob #5 ❑ Fob #6 ❑ Fob #7 ❑ Fob #8
• Key fob emergency keys. (Check one emergency function for each key fob.)
Function
Auxiliary Alarm
Audible Alarm
Silent Panic Alarm
Fire Alarm
Emergency Keys Disabled

Key Fob Arming to Stay Mode

• To arm the system to Stay Mode using a key fob, press the
✓ NOTE: If there are open perimeter doors or windows, the system will not allow arming to Stay
Mode with a wireless key fob. All open sensors must be bypassed at the Control Panel fi rst.

Key Fob Arming to Away Mode

• To arm the system to Away Mode using a key fob, press the
✓ NOTE: If there are open perimeter doors or windows, the system will not allow arming to
Away Mode with a wireless key fob. All open sensor-protected doors and windows must
either be closed or bypassed at the Control Panel before arming with a wireless key fob.

Key Fob Disarming

• To disarm the system from Stay or Away Mode using a key fob, press the
(DISARM) button. (This option must be enabled by the installer.)

Key Fob Emergency

• To trigger an emergency alarm using a key fob, press the
buttons at the same time for fi ve seconds. (This option must be enabled by the installer.)
✓ NOTE: If an emergency alarm is triggered by a key fob, it cannot be stopped using a key fob
(DISARM) button. The alarm must be canceled at the Control Panel.

Key Fob Auxiliary

• To trigger the Control Panel's auxiliary output, press the
• If this feature is used, your auxiliary output controls: _______________________________
16
Fob #1 Fob #2 Fob #3 Fob #4 Fob #5 Fob #6
(STAY) button.
(AWAY) button.
(AWAY) and
(AUXILIARY) button.
Fob #7 Fob #8
(DISARM)