Saving Energy While Charging The Device - Garmin Pilot’s Guide Pilot's Manual

You can use the clip to attach the device to your belt, pocket, or
bag.
1 Slide the bottom of the device into the bottom of the clip.
NOTE: If you place the device into the clip upside-down, it
does not lock into place and could fall out of the clip easily.
2 Press the top of the device into the top of the clip until it
clicks.
3
To remove the device, pull up the top of the clip while
pressing on the back of the device, and slide the bottom of
the device out of the bottom of the clip.

Saving Energy While Charging the Device

You can turn off the device display and all other features while
charging.
1 Connect your device to an external power source.
The remaining battery capacity appears.
2
Hold the power key for 4 to 5 seconds.
The display turns off, and the device goes into a low power,
battery charging mode.
3
Charge the device completely.
6 Appendix