Lemair XQB22-(AUS)22G Operation Manual
  1. Manuals
  2. Brands
  3. Lemair Manuals
  4. Washer
  5. XQB22-(AUS)22G
  6. Operation manual

Lemair XQB22-(AUS)22G Operation Manual

Fully automatic
Hide thumbs

Advertisement

Table of Contents

Operation Instructions

FULLY AUTOMATIC WASHING MACHINE
XQB22-(AUS)22G
The machine is for cold water connection only

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XQB22-(AUS)22G and is the answer not in the manual?

Questions and answers

Peter Dawson
March 26, 2025

All lights are on but when you press the start button machine won’t start I have checked water tap What do you think would be wrong? Starter switch?

0
1 comments:
Mr. Anderson
March 26, 2025

If all lights are on but the Lemair XQB22-(AUS)22G washing machine won't start when the start button is pressed, check the following:

1. Power Supply – Ensure there is no power failure and the plug is correctly inserted into the power socket.
2. Fuse – Check if the fuse is burnt out.
3. Power Switch – Make sure the power switch has been pressed.
4. Start/Hold Button – Confirm that the [START/HOLD] button has been pressed properly.
5. Water Level – Ensure the set water level has been reached.
6. Water Supply – Verify that the water inlet hose is connected properly and the tap is turned on.
7. Lid Position – Ensure the lid is closed, as the machine may not operate if the lid is open.

If these checks do not resolve the issue, further inspection may be needed.

This answer is automatically generated

0
Judith Carey
May 17, 2025

Where do we find the fuse in the lamair caravan washing machine

0
Maureen Frost
May 17, 2025

We’re are the fuse

0
geoff carter
May 17, 2025

replace spring in lid

0
Sue Brough
April 20, 2025

Where do you purchase a new spin belt?

0

Related Manuals for Lemair XQB22-(AUS)22G

Summary of Contents for Lemair XQB22-(AUS)22G

  • Page 1: Operation Instructions

    Operation Instructions FULLY AUTOMATIC WASHING MACHINE XQB22-(AUS)22G The machine is for cold water connection only...

  • Page 2: Table Of Contents

    CONTENTS PARTS IDENTIFICATION FUNCTIONS OF OPERATING SWITCHES SAFETY PRECAUTIONS INSTALLATION WASHING PROCEDURES WASHING PROCEDURE CHART INDICATION OF ABNORMITY POWER VOLTAGE TUB CLEANING PROGRAM TROUBLE SHOOTING MAIN TECHNICAL PARAMETERS...

  • Page 3: Parts Identification

    PARTS IDENTIFICATION ACCESSORIES Inlet Hose 1pc Upper drain hose 1pc...

  • Page 4: Functions Of Operating Switches

    FUNCTIONS OF OPERATING SWITCHES POWER SWITCH Power supply is turned on by pressing down the button, and washer is in a mode of normal washing; and turned off by another press. After washing,power switch will spring up automatically to cut off power supply. POWER WATER LEVEL SELECTOR Secelt the water level according to the capacity...

  • Page 5: Safety Precautions

    SAFETY PRECAUTIONS Caution for Rotating Tub Power Line *When take off the plug, be sure to hold Donot put your hand into the rotating tub. the plug and not to pull the power line. *Do not put heavy articles on the power line or have it pressed by machine parts.

  • Page 6: Installation

    INSTALLATION Installation of water inlet pipe Put the water inlet pipe(which has metallic filtering bag) screw on to the tap.

  • Page 7: Washing Procedures

    WASHING PROCEDURES 1. First loose the adjust foot knob , place the washer evenly and stably,and tighten the knob. 2. Connect with the water inlet hose , and turn on the water tap. 3. Insert the power plug into the power socket (with the earth lead properly connected).

  • Page 8: Washing Procedure Chart

    WASHING PROCEDURE CHART INDICATION OF ABNORMITY Abnormal spin If the clothes to be spun have been coUected or crowded on one side of the Uib. the tub will b& unbalanced during rotation. The microcomputer will detect the unbalanced condition and cor- rect it with the following operations: Water filling rinse(1min.) Drain spin.

  • Page 9: Tub Cleaning Program

    TUB CLEANING PROGRAM Instruction to the tub cleaning program Switch on the power. It will be adhere to wash powder's residue inside and outside the barrel because of the pollution POWER AUTOMATIC TURNOFF and the problem of the water quality. It will take smelly and the drain will not be flowing.

  • Page 10: Trouble Shooting

    TROUBLE SHOOTING Items to Check Fault * If a power failure. * If the plug inserted correctly into the power socket. * If the fuse burnt out. Do not Operate Completely * If the power switch pressed. * If START / PAUSE button pressed. * If the set water level reached.

Table of Contents

Save PDF