1.5. Important recommendations for the SIM Card http://kaywa.me/0dYS0 You will need to supply your own SIm card. we advise you to choose the same gSm SIm provider for your Zolo gSm Security System the one you use for your mobile phone. This will ensure the fastest, most reliable SMS/text message delivery service and phone call connection. Download the Kaywa QR Code Reader (App Store &Android Market) and scan your code! For maximum system reliability we recommend that you do not use a pay as You go SIm card.
5 and 6. Connect the antenna to the ZOLO Communica- tion Card. take the wire of the enclosed antenna through the hole in the rear metal plate of the fog can- non – and connect it to the Zolo communica- tion card.
Mount the fog cannon. Important! to mount the fog cannon follow the installation manual supplied with the product. Installation Manual Important! to avoid release of the fog during installation, the fluid container and metal cabinet/cover should be in- serted into place just before carrying out the full scale test, as per the instructions in the Fog cannon manual.
Insert the unlocked SIm card (not included). Remember to open/lock the SIM Card holder when inserting/releasing the SIM Card. Check that the backup battery is placed correctly. Connect the ZOLO device to the power supply. plug the enclosed power supply connector into the device and insert the plug into the mains socket.
Connect ZOLO to your PC via the USB cable. Use the enclosed USb cable to connect Zolo to the computer containing the Zolo Configuration Tool. run the software anytime you want by double left-clicking on the Zolo Configuration Tool shortcut or icon located on the computer.
Open “Wireless Device Management” section. this section uses radar to show wireless devices (like e.g. a fog cannon) visible to Zolo within its wireless range. Unbound devices are indicated by a device icon with a red stripe above the icon. once the device is bound, the stripe turns to green.
For example you can read how to add and edit up to 10 phone numbers controlling Zolo. How to check that ZOLO is working and de- tecting motion. when the red leD is switched off move your hand in front of Zolo. the system will detect the motion and the leD will light up for a few seconds.
* or: wireless device battery is out of energy or the device is not switched oN * I f you normally configure your ZOLO by SMS text- messages, you should be aware that there are some user options which can be set when using the Zolo Some users are not getting arm/disarm Configuration Tool but not when using configuration and/or alarm notifications by SmS.
Antenna: the antenna is connected to the Zolo communication card inside the fog cannon the antenna is placed on the outside of the fog cannon’s metal cover the antenna is magnetic which makes the installation easy...
Page 14
PROTECT A/S is the world’s largest supplier and the only producer of Fog Cannons in Scandinavia. protect is represented worldwide in 40 countries. www.protectglobal.com PROTECT A/S · Hasselager Centervej 5 · DK-8260 Viby J · Tel.: (+45) 86 72 18 81 · Fax: (+45) 86 72 18 82 · Mail: info@protectglobal.com...
Need help?
Do you have a question about the ZOLO and is the answer not in the manual?
Questions and answers