Download Print this page
Numatic HVR 200A Owner's Instructions Manual

Numatic HVR 200A Owner's Instructions Manual

Hide thumbs Also See for HVR 200A:

Advertisement

Owner Instructions
Warning! Read instructions before using the machine
HVR 200A
HET 200A
HHR 200A
www.numatic.com

Advertisement

loading

Summary of Contents for Numatic HVR 200A

  • Page 1 Owner Instructions Warning! Read instructions before using the machine HVR 200A HET 200A HHR 200A www.numatic.com...
  • Page 2 HVR 200A, HET 200A Kit - A1 607407 601008 601008 601027 601144 601145 601141 601101 601529 601142 601146 HHR 200A, Kit - H1 607171 601008 601008 601027 601144 601145 601228 601101 601141 601529 601142 601146 Assembly...
  • Page 3: Using Your Machine

    Using your machine Start 1200W 600W Suction Suction 1500 mm w.g. 2500 mm w.g. 100%...
  • Page 4 Cleaning...
  • Page 5 Fitting the Face on CLICK CLICK Removing the Face CLICK...
  • Page 6 Wand docking 601059 237373...
  • Page 7: About Your Machine

    Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an enviromental-friendly manner. Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline +44 (0)1460 269268 Daily Keep the machine clean, including hoses and tubes (1).
  • Page 8 ● Replace any worn or damaged parts immediately. ● Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a competent person using the correct Numatic original part. ● Change dust bag frequently.
  • Page 9: Schematic Diagram

    Data Power Motor Airflow Suction 1200W 2500mm w.g. 42 l/sec 600W 1500mm w.g. Size Capacity Cleaning Range Weight 26.8 m 6.9 Kg Size Sound Pressure Protection Class 355 x 355 x 415 mm 64 dB - 68 dB (A) Class II (IEC 60704-2-1) Uncertainty 0.2 dB Schematic Diagram...
  • Page 10: Eu Declaration Of Conformity

    Type: HVR, HET, HVX, NRV, NVR, EVR, VNR, NSR, HMR, HHR, NNR series Manufactured by: Numatic International Limited This equipment has been designed and manufactured in accordance with the following standards: IEC 60335-1 2001 + A1 2004 + A2 2006 + National...
  • Page 12 Distributed by:- Numatic International Limited, Chard, Somerset, TA20 2GB Telephone: 01460 68600 Fax: 01460 68458 www.numatic.co.uk www.numatic.de www.numatic.ch UNITED KINGDOM: GERMANY: SWITZERLAND: www.numatic.fr www.numatic.nl www.numatic.co.za FRANCE: NETHERLANDS: SOUTH AFRICA: Specification subject to change without prior notice www.numatic.com © Numatic International Limited...