Recharging Operation - Explorer GT 50 Service And Maintenance Manual

RECHARGING OPERATION

Apply multimeter to measure the voltage of battery. If the reading is below 12.0V it should be
charged.
NOTE:
When recharging, remove the battery form the vehicle.
NOTE:
When recharging, don't remove the sealing cap off battery top.
Recharging time 0.4A or for 5 hours or 4.0A for 1 hour.
NOTE:
The current should be not more than 4A at any time.
After recharging, wait for more than 30 minutes and apply multimeter to measure the battery
voltage.
If the battery voltage is less than12.5V please rechare the battery again.
If battery voltage is still less than 12.5V please replace the battery with a new one.
When the battery is left for a long term without using, it is subject to discharge. When th scooter is
not used for more than 1 month (especially dring the winter season), recharge the battery once a
month at least.
74