EverFocus eZ.HD ECOR HD 4F User Manual page 16

No. Name
1 Video Input
2 Call Monitor Port (BNC)
3 Audio Input 1~4 (RCA)
4 Alarm Input / Output
5 Power Switch
6 Main Monitor Port (HDMI)
7 Audio Output RCA
8 Main Monitor Port (VGA)
9 LAN
10 USB Interface
11 RS-485 Port
12 Power Port
Description
Connect up to 4 / 8 / 16 cameras using the coaxial cables.
Note:
1. You must connect a camera to the channel 1 of the DVR
so that it can automatically detect the video signal type
(NTSC or PAL).
2. The ECOR HD 4F / 8F / 16F DVR has 4 / 8 / 16 video
inputs which are all compatible with both HD (EverFocus
eZ.HD series camera) and SD cameras*; however, the 4 / 8
/16 video inputs are divided into 2 / 4 / 8 pairs as the figure
above. Therefore, when connecting HD and SD cameras to
the DVR, you should connect either type of the above
cameras to the SAME pair video inputs (Please see the
example on the next page).
* The eZ.HD series DVR doesn't support HD-TVI / HD-CVI
cameras.
Connects to the Call monitor using a BNC cable.
Connects to the audio input devices such as microphones.
Note that the microphone with a (built-in) amplifier and
external power supply is required.
Connects to 4 alarm inputs, and to 1 alarm output device.
You can also connect to the radio-controlled clock for time
synchronization. Please refer to 2.2.2 Alarm I/O.
Press to turn on or off the power.
Connects to the Main monitor using a HDMI cable.
Connects to the audio output devices, such as speakers.
Note that the speaker with a (built-in) amplifier and external
power is required.
Connects to the Main monitor using a VGA cable.
Connects to the Network.
The USB2.0 port for connecting to a mouse, external storage
device or EKB200 keyboard.
Connects to the RS-485 device, such as EverFocus' EKB-500
keyboard.
Connects to the DC 12V power using the supplied Power
Cord.
8
ECOR HD 4F / 8F / 16F