Table of Contents
Advertisement
AC USAGE OUTLETS
WARNING
Electrical shock can occur
if AC cord is damaged or
frayed. Never use a damaged
or frayed AC cord. Replace
with a new cord before
proceeding with AC usage.
See Contact Information on
page 2.
• To use your AC outlets, first turn on the inverter by depressing the
outlet button (A).
• Once on, the outlets will work like normal AC wall outlets in your
home; just plug in the devices you want to run.
• Please note: The outlets are based on a ground-fault circuit
interrupter (GFCI) which means that if there is a power surge
or short, the outlets will trip an internal safety fuse. To reset the
safety fuse, unplug the device you are trying to power, switch off
the inverter by depressing the power button for 3 seconds, then
turn on the inverter by once again depressing the power button
for 3 seconds. Now press the reset button (B) on the GFCI outlet
and wait for the small green light to appear right above the reset
button. You can now commence using your outlet again.
A
B
13
Hide quick links:
Advertisement
Table of Contents
