Acura 2016 ILX Owner's Manual page 435

uuReplacing Light BulbsuSide Marker Light Bulbs
Side Marker Light Bulbs
When replacing, use the following bulbs.
Side Marker Light: 3 CP
Screw
Inner
Fender
Tab
434
1. Turn the steering wheel all the way to the
Clip (B)
opposite side from the light being replaced.
Passenger side: Turn the steering wheel to
the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips (A), (B) and screw,
pull the inner fender back.
Clips (A)
3. Push the tab to remove the coupler.
Coupler
1Side Marker Light Bulbs
Holding clip (A-type)
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Insert the clip with the center pin raised, and push
until it is flat.
Push until the
pin is flat