Page 1
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen GWS Professional www.bosch-pt.com 22-180 LVI | 22-230 LVI | 24-180 LVI | 24-230 LVI 1 609 929 L56 (2008.06) O / 372 UNI de Originalbetriebsanleitung el Πρωτότυπο οδηγιών χρήσης ro Instrucţiuni de folosire en Original instructions tr Orijinal işletme talimat...
Page 2
OBJ_DOKU-7162-004.fm Page 4 Wednesday, June 4, 2008 11:30 AM 1 609 929 L56 | (4.6.08) Bosch Power Tools 1 609 929 L56 | (4.6.08) Bosch Power Tools...
Keep your hair, clothing Damaged or entangled cords increase the and gloves away from moving parts. risk of electric shock. Loose clothes, jewellery or long hair can be caught in moving parts. Bosch Power Tools 1 609 929 L56 | (4.6.08)
Use of the power tool for mounting hardware of the power tool will run operations different from those intended out of balance, vibrate excessively and may could result in a hazardous situation. cause loss of control. 1 609 929 L56 | (4.6.08) Bosch Power Tools...
If you lose control of the power tool, proper precautions as given below. the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory. Bosch Power Tools 1 609 929 L56 | (4.6.08)
Penetrating a water line used. causes property damage or may cause an With approved sanding tools, the machine can electric shock. be used for sanding with sanding discs. Bosch Power Tools 1 609 929 L56 | (4.6.08)
Dr. Eckerhard Strötgen Sound power level 103 dB(A). Uncertainty Senior Vice President Head of Product K =3 dB. Engineering Certification Wear hearing protection! 28.01.2008, Robert Bosch GmbH, Power Tools Division D-70745 Leinfelden-Echterdingen 1 609 929 L56 | (4.6.08) Bosch Power Tools...
The tightening tension of the clamp from the ance“. protection guard 6 can be changed by loosening or tightening the adjustment screw 9. Ensure that the protection guard 6 is tightly seated and check regularly. Bosch Power Tools 1 609 929 L56 | (4.6.08)
Page 10
17 or with the cup brush/wheel 1 600 210 039) before the brush/flap disc, always mount the hand mounting flange 10 is mount- guard 15. The hand guard 15 is fastened with the auxiliary handle 4. 1 609 929 L56 | (4.6.08) Bosch Power Tools...
Page 11
13. When screwing on, pay attention that the side of the quick-clamping nut 13 with printing does not face the grinding disc; the arrow must point to the index mark 23. Bosch Power Tools 1 609 929 L56 | (4.6.08)
3 forward and then down. the main handle 24 to the requested position until it latches. To lock-on the pressed On/Off switch 3, push the On/Off switch 3 further forward. 1 609 929 L56 | (4.6.08) Bosch Power Tools...
For safe and proper working, always keep The vacuum cleaner must be approved for the the machine and ventilation slots clean. extraction of masonry dust. Bosch provides suit- In extreme working conditions, conductive able vacuum cleaners. dust can accumulate in the interior of the Switch on the ma- machine when working with metal.
Page 15
Origo Ltd. should be carried out by an after-sales service Unit 23 Magna Drive centre for Bosch power tools. Magna Business Park In all correspondence and spare parts order, City West please always include the 10-digit article Dublin 24 number given on the type plate of the machine.