Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Enerdrive EPL-100AH-12v-BATT
Summary of Contents for Enerdrive EPL-100AH-12v-BATT
- Page 1 Lithium Power Pack Lithium-Ion Battery System Owner’s Manual V1.0 1/2015...
- Page 2 • Subject to specific requirements, this option may only be suitable for certain applications. If unsure, please contact Enerdrive for further details. V1.0 1/2015...
- Page 3 It is the responsibility of the end user to maintain the battery in a charged state. The battery should not be left for more than 30 days without checking its charge state. Enerdrive recommend that a battery left in a “storage state”...
- Page 4 What’s in the Enerdrive Lithium System? To use the Enerdrive Lithium Power Pack you need to use two items together. These are: • The actual lithium power pack battery box. • The Advance BMS controller board which includes • The Advance BMS Relay Driver box •...
- Page 5 Voltages for Lithium batteries have a very narrow window compared to lead acid batteries. With all of our testing over the last 2-3 years, the Enerdrive Lithium battery standing voltage when fully charged (with no loads running) will be between 13.35v-13.45v at 100% capacity.
- Page 6 When Red Light is ON When Red Light is ON Contact is closed due Contact is open due to hi cell voltage to hi cell voltage System Program NO/CM/NC NO/CM/NC Selection Switch Output 3 Output 4 Output 1-4 Disabled Max -10amp Max -10amp Dip Switch Output 2...
- Page 11 Pro-Rata warranty applicable to original end user only. Enerdrive does not warrant the battery for use in any residential system sold with the intent or purpose of a “Tariff Adjustment Program” of any type.
- Page 12 It is the responsibility of the end user to maintain the battery in a charged state. The battery should not be left for more than 30 days without checking its charge state. Enerdrive recommend that a battery left in a “storage state”...
- Page 13 Enerdrive within 30 days of the date of purchase will be replaced free of charge. If such a unit is returned more than 30 days but less than two years from the purchase date, Enerdrive will repair the unit or, at its option, replace it, free of charge. If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option.
Need help?
Do you have a question about the EPL-100AH-12v-BATT and is the answer not in the manual?
Questions and answers