Switch To <Af> (P - Canon EOS REBEL EOS T5 1200D Instruction Manual

Troubleshooting Guide
No images can be shot or recorded.
Make sure the card is properly inserted (p.32).
Slide the card's write-protect switch to the write/erase position (p.32).
If the card is full, replace the card or delete unnecessary images to
make space (p.32, 227).
If you try to focus in the One-Shot AF while the focus confirmation light
<o> in the viewfinder blinks, a picture cannot be taken. Press the
shutter button halfway again to refocus automatically, or focus
manually (p.45, 97).
The card cannot be used.
If a card error message is displayed, see page 34 or 296.
The image is out of focus.
Set the lens's focus mode switch to <AF> (p.40).
To prevent camera shake, press the shutter button gently (p.44, 45).
If the lens has an Image Stabilizer, set the IS switch to <1>.
In low light, the shutter speed may become slow. Use a faster shutter
speed (p.104), set a higher ISO speed (p.88), use flash (p.101), or use
a tripod.
I cannot lock the focus and recompose the shot.
Set the AF operation to One-Shot AF. Focus lock is not possible in the
AI Servo AF, or when servo takes effect in AI Focus AF (p.93).
286