LG 42PT250-ZA Owner's Manual page 79

Setting
Power Indicator
(Only LCD/LED
LCD TV)
Data Service
(only in Ireland.)
Factory Reset
Set ID
Mode Setting
Downloaded From TV-Manual.com Manuals
Sets to turn on or off the indicator light on the TV.
If you select 3D mode, Power indicator is turned off automatically.
Option
Standby Light Set to turn on or off the indicator light in Standby mode.
Power Light Set to turn on or off the indicator light when you turn on the power.
This function allow users to choose between MHEG (Digital Teletext) and Teletext if both exist at
the same time.
This function initializes all settings.
NOTE
In Lock System "On", if you forget your password, press '0', '3', '2', '5' on the remote
y
control handset.
Adds an ID to the connected devices
Default selection is "Home Use". We recommend setting the TV to "Home Use" mode for the best
picture in your home environment.
Option
Home Use Selects it for the home environment.
Store Demo Selects it for the retail environment.
Demo Mode Sets to show special features of the TV. You can cancel the demo
mode by pressing any buttons except the Volume and Mute buttons.
Description
NOTE
It is not possible to use Demo Mode in Home Use mode.
y
In Store Demo, Demo Mode is automatically set to On.
y
Once Demo Mode is set to Off in Store Demo, Demo Mode
y
does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in Demo
y
Mode.
CUSTOMIZING SETTINGS
79