Table of Contents
Advertisement
A. STARTING ENGINE USING
ELECTRIC STARTER:
● Turn main switch to "ON".
● Turn secondary emergency cut off switch to the run/on position.**
● Hold brake and press starter switch to engage electric starter.
● Do not turn throttle grip, just press starter switch button to start engine.
● Do not engage the starter for more than 4 seconds at a time.
● After engine starts, release the starter button at once.
● When engine is in operation, do not press the starter button.
Doing so will damage electric starter.
** Most models have a switch with a circle meaning on
and a circle with an X and/or a line through it meaning off.
● If motorcycle has not been used for a long time it may
be difficult to start, turn throttle grip 1/8-1/4 turn and start engine again.
● Warm up engine for 2-3 minutes before operation.
III. HOW TO START ENGINE
There are two ways to start your engine.
10
Advertisement
Table of Contents
