Do you have a question about the MCM1110W/B and is the answer not in the manual?
Questions and answers
Joseph Adrian Thompson
March 9, 2025
How do I change the microwave clock ?
1 comments:
Mr. Anderson
May 14, 2025
To change the clock on the Magic Chef MCM1110W/B microwave:
1. When power is first connected, “0:00” appears on the display. 2. Enter a valid time between 1:00 and 12:59 using the number keys. 3. If no input is made within one minute or the "STOP/CLEAR" key is pressed, the clock setting will cancel. 4. Once the correct time is entered, confirm it by following the microwave’s clock-setting procedure (exact method not fully available in the context).
Note: Full clock-setting steps are not included in the provided content.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.
Use extreme care when inserting a spoon or other utensil into the container. 18. Do not use this microwave oven to heat corrosive chemicals (for example, sulfides and chlorides). Vapors from such corrosive chemicals may interact with the contact and springs of the safety interlock switches thereby rendering them inoperable.
• Relocate the Microwave oven with respect to the receiver. • Move the microwave oven away from the receiver. • Plug the microwave oven into a different outlet so that microwave oven and receiver are on different branch circuits. THE MANUFACTURER is not responsible for any radio or TV interference caused by UNAUTHORIZED MODIFICATION to this microwave oven.
6. Power supply. • Check your local power source. This microwave oven requires a current of approximately 12 amperes, 120Volts, 60Hz grounded outlet. 1. A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
SPECIFICATIONS POWER SUPPLY INPUT POWER MICROWAVE ENERGY OUTPUT FREQUENCY OUTSIDE DIMENSIONS (W CAVITY DIMENSIONS (W CAVITY VOLUME NET WEIGHT TIMER POWER LEVELS * Specifications are subject to change without notice. 120V AC, 60Hz SINGLE PHASE WITH GROUNDING 1500 W 1000 W 2,450MHz 513x305x425 mm (20.2x12x16.7 in) 328x226x368 mm (12.9x8.9x14.5 in)
Reset the clock if needed. See “Clock” section. When the microwave oven is in use, the display shows cook time remaining. When the microwave oven is not in use, the display shows the time of day (if the clock is set) or Timer countdown.
Control Panel. If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This may occur when the microwave oven is operated under high humidity conditions and in ROLLER GUIDE The ROLLER GUIDE and oven floor should be cleaned frequently to prevent excessive noise.
BEFORE YOU CALL FOR SERVICE Refer to following checklist, you may prevent an unnecessary service call. * The oven doesn’t work : 1. Check that the power cord is securely plugged 2. Check that the door is firmly closed. 3. Check that the cooking time is set. 4.
These must be pierced before cooking to prevent bursting. Do not attempt to deep fat fry in your microwave oven. Always allow a standing time of at least 20 seconds after the oven has been switched off to allow the...
Microwave Oven Warranty MC Appliance corp. warrants each new Microwave Oven to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase.
Need help?
Do you have a question about the MCM1110W/B and is the answer not in the manual?
Questions and answers
How do I change the microwave clock ?
To change the clock on the Magic Chef MCM1110W/B microwave:
1. When power is first connected, “0:00” appears on the display.
2. Enter a valid time between 1:00 and 12:59 using the number keys.
3. If no input is made within one minute or the "STOP/CLEAR" key is pressed, the clock setting will cancel.
4. Once the correct time is entered, confirm it by following the microwave’s clock-setting procedure (exact method not fully available in the context).
Note: Full clock-setting steps are not included in the provided content.
This answer is automatically generated