Table of Contents
Advertisement
Available languages
Available languages
Operating Instructions
1)
Always place the blender on a flat, clean and non-slippery surface before
operating it.
2)
Open the lid and add all necessary ingredients to the blender jar. Replace
the lid and the pouring hole cover.
3)
For using low speeds (1-5) the 'H' / 'L' button must be recessed, then
choose low speeds 1-5. To change to high speeds (6-10) turn unit off, make
sure the 'H' / 'L' button is up, then choose speeds 6-10.
Caution: Always first turn unit off, before switching from Hi speeds to Low
speeds or low speeds to high speeds.
4)
To use the pulse button, you must hold to press for operating. The blender
will stop when you release the pulse button.
5)
When the blending is finished, turn the jar anti-clockwise and lift it off the
base. Then remove the lid. Pour the ingredients out through the spout.
6)
Do not operate the blender longer than 2minutes. After each the 2 minutes
session the blender must be allowed to cool down for at least 10 minutes.
7
Advertisement
Chapters
Table of Contents
