Table of Contents
Advertisement
1 [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a
DHCP server.
Note
f When you use the "Forward" and "Back" functions of your browser, a warning message "Page has Expired" may appear. In
that case, click [Network config] again since the following operation will not be guaranteed.
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
Wireless LAN (M-DIRECT)
1 [IP ADDRESS]
Enter the IP address.
2 [SUBNET MASK]
Enter the subnet mask.
3 [SSID]
Set the SSID to be used in M-DIRECT.
4 [CHANNEL]
Set the channel to be used in M-DIRECT.
Wireless LAN (USER 1~USER 3)
Chapter 4 Settings - [NETWORK/USB] menu
Chapter 4 Settings - [NETWORK/USB] menu
5 [DNS1]/[DNS2]
Enter the DNS1/DNS2 server address.
Permissible/ available characters for the entry of DNS1/
DNS2 server address.
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253).
6 [Back]/[Next]
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
5 [KEY]
Set the key to be used in M-DIRECT.
Input either 8 to 63 alphanumerics or a 64 digit string in the
hexadecimal format.
6 [Back]/[Next]
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
1
2
3
4
5
6
7
1
2
3
4
5
6
ENGLISH - 105
8
9
7
10
7
Advertisement
Table of Contents
