Advertisement
Plug the card reader's connector to an available USB port (usually blue) on your
motherboard. Before use, we recommend that you consult the manual for your
motherboard or computer on this point.
The card reader uses 2 connectors. The white connector can only be fitted
in one way. The black connector has to be fitted with the white spot to the
right-hand side of the card reader.
PLEASE NOTICE: When the connector is placed incorrect, USB peripherals
attached to the front USB-port can get defective.
Once the card reader has been installed, you can replace the cover on the
computer housing and properly reconnect all the cables that you had removed
from the PC.
Windows will automatically detect the new hardware upon reboot and load the
default drivers already available in Windows.
As soon as the drivers have been installed, the card reader is ready for use. We
advise you to reboot your computer before using the card reader with USB port.
6
Advertisement
