Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for eSync SSA-0424e
-
Page 2: Fcc Compliance Statement
Appendix A FCC Compliance Statement Model Name: eSync Series (SSA-1648e, SSA-0824e, SSA-0424e). This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two conductions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. -
Page 3: Cautions
DVR Manual Appendix A CAUTIONS To get the best use out of the eSync DVR, be sure to read the cautions before using the eSync unit. For safety, please take note of the following: • Before turning on the DVR To prevent electric shock when installing, moving, or opening the DVR and peripheral devices, disconnect the power cable. -
Page 4: Table Of Contents
4-8 Playback ............................18 4-8-1 Shifting to Playback Mode......................18 4-8-2 Playback Menu..........................18 4-8-3 Multi-Channel Search........................19 4-8-4 Multi-Time Search ........................20 4-8-5 Multi-Day Search......................... 21 4-8-6 Playback Speed Control......................22 Revision A - 3 - © 2008 eSync Manual © eSync... - Page 5 5-1-7 System ............................42 5-1-8 Storage............................47 5-1-9 NTP ............................. 51 5-2 Application Setup..........................53 5-2-1 Selecting the Application Setup Menu ..................53 5-2-2 PTZ setup............................ 53 5-2-3 Network setup ..........................55 Revision A - 4 - © 2008 eSync Manual © eSync...
-
Page 6: Chapter 1. Introduction
1-1 About the Product The eSync Series is a digital video recorder that can monitor, record, play, archive, network, and transmit video singal from 4, 8, and 16 cameras depending on model. Using the front buttons, remote controller, mouse, and keyboard controller the user can control the DVR. -
Page 7: Components
DVR Manual Introduction 1-3 Components After unpacking the product, check whether the following accessories are included: eSync CMS CD (e-Manual, CMS, PDA Viewer) eSync User Manual Remote Controller Two AAA 1.5V batteries Power Cord Rack Mounting Handle Revision A - 6 - ©... -
Page 8: Chapter 2. Installation And Connection
Chapter 2. Installation and Connection 2-1 Name and Features of Each Panels The front panel of eSync Series features easy-to-use buttons for various DVR features. The back panel consists of all the connections of devices such as (i.e. camera, audio, RS485, sensor, relay, display output, Ethernet, IEEE1394 Firewire, etc.) -
Page 9: Back Panel
Features Type AC POWER Power cable connection to the body AC Selector Not Available for Americas eSync Model RS485 Connection for the PTZ - See chart on the lower right back panel for detail Terminal Sensor/Relay extension board connect ion... -
Page 10: Installation And Connection
For more information on setup by sensor type, refer to {Data Setup} {Event Setup} {Sensor}. Normal Close (NC): Normally closed; opens when a signal is received Normal Open (NO): Normally open; closes when a signal is received Revision A - 9 - © 2008 eSync Manual © eSync... -
Page 11: Chapter 3. Operation And Setup Tools
DVR Manual Operation and Setup Tools Chapter 3. Operation and Setup Tools The user can easily operate the eSync DVR using the front buttons, remote controller, and mouse. 3-1 Remote Controller A. Basic control buttons POWER System power ON or OFF... -
Page 12: Mouse
Reverse Frame by Frame Reverse play frame by frame Reverse Play / Fast Reverse Reverse play/ Rewind 3-2 Mouse The USB2.0 mouse (purchased separately) can be used to operate the DVR. Revision A - 11 - © 2008 eSync Manual © eSync... -
Page 13: Chapter 4. System Operation
After the system is booted, images of all connected channels will be displayed. • When powering up the DVR the boot process will enable the eSync System Checker and Watch Dog feature to ensure the proper performance of DVR. •... -
Page 14: Menus In Live Mode
Move the cursor to the date/time status section. The recording status window will be bordered. At this time, drag the recording status window to the desired location. [Figure 4-2. Recording Status Window] Revision A - 13 - © 2008 eSync Manual © eSync... -
Page 15: System Login
System Operation 4-3 System Login 4-3-1 User Accounts eSync DVR is divided into two different user levels; local administrator and general users. Admin The local administrator can use all functions of eSync DVR. (only limited locally) Up to four user levels are allowed. -
Page 16: Audio Recording And Playback
Set up the audio. [Figure 4-4. Main Setup Window (Data Mode)] 4-4-2 Live Audio On the Live mode window, press the {Menu Button} {Control} {Audio}. Select the audio channel. Revision A - 15 - © 2008 eSync Manual © eSync... -
Page 17: Viewing System Information And Changing The Display Setup
To adjust the brightness, select a channel on the screen to adjust the brightness by using the arrow keys Activate the channel selection window using the [ESC] button and adjust the brightness of the other channels by repeating step 2. Revision A - 16 - © 2008 eSync Manual © eSync... -
Page 18: Adjusting The Screen Contrast
4-7 Relay Out On the Live mode window, press the {Menu Button} {Control} {Relay Output}. Selecting a relay channel enables function of the relay. Revision A - 17 - © 2008 eSync Manual © eSync... -
Page 19: Playback
Figure 4-7. Select the desired feature using the arrow keys. Press the ESC button or right-click the Menu button to hide the menu. [Figure 4-7. Playback Menu] Revision A - 18 - © 2008 eSync Manual © eSync... -
Page 20: Multi-Channel Search
The user can playback the video contents at a specifc recored time. In Playback mode, multi-channel playback can be run by selecting {Playback Menu} {Multi-Channel}. [Figure 4-8. Multi-Channel Playback Screen] Revision A - 19 - © 2008 eSync Manual © eSync... -
Page 21: Multi-Time Search
In Playback mode, select {Playback Menu} {Multi-Time}. The user can run multi-time playback by selecting a channel using the arrow keys and press the [Select] button. Time [Figure 4-9. Multi-Time Playback] Revision A - 20 - © 2008 eSync Manual © eSync... -
Page 22: Multi-Day Search
In Playback mode, select {Playback Menu} {Multi-Day}. The user can run multi-day playback by selecting a certain channel using the arrow keys and press the [Select] button. [Figure 4-10. Multi-Day Playback Screen] Revision A - 21 - © 2008 eSync Manual © eSync... -
Page 23: Playback Speed Control
This feature search and plays specific events from the event list. In Playback mode, select {Playback Menu} {Event}. Select an event using the arrow keys and press the [Select] button. Revision A - 22 - © 2008 eSync Manual © eSync... -
Page 24: Go To The Date & Time Search
The latest data will be played back by selecting {Playback Menu} {Go To The Last} in Playback mode. The user can use the Go-To-The-First Search and the Go-To-The-Last Search functions only in {Multi-Channel} mode. [Figure 4-12. Playback Menu] Revision A - 23 - © 2008 eSync Manual © eSync... -
Page 25: Log List
To view the log details, select the desired date with a red icon. Selecting a date with a blue icon causes the changed date list to appear. Revision A - 24 - © 2008 eSync Manual © eSync... -
Page 26: Recording
DVR Manual System Operation 4-10 Recording 4-10-1 Recording Types The eSync series supports various recording types as shown below. Recording Type Description The user has the option to set two types of recording frame rates: one for normal recording, and one Automatic for event recording (i.e. -
Page 27: Starting And Stopping Force Record
On the recording stop confirmation window, select the [Yes] button. Any channel recording in progress will stop, and the corresponding status will be displayed on the recording status window. Revision A - 26 - © 2008 eSync Manual © eSync... -
Page 28: Search
In Multi-Channel search mode, the user can run a search using the file list only. Current Recorded video file based on the current DVR time Old_Number Recorded video file based on the previous DVR time Revision A - 27 - © 2008 eSync Manual © eSync... -
Page 29: Multi-Channel Search
Select the hour, and then it will display the minutes. Select the minutes to review the video files. Click Menu and select Multi-Time Search to choose the specific channel. Revision A - 28 - © 2008 eSync Manual © eSync... -
Page 30: Backup
(Default is all channels. However, only the channels that have data will be available for backup.) Press the OK button to initiate the backup process. Video files before a [Time Zone Setting] change cannot be backed up. [Figure 4-15. Backup Window] Revision A - 29 - © 2008 eSync Manual © eSync... -
Page 31: Snapshot
The direct print function will print out the currently displayed image to any attached printer via USB2.0. To print the displayed image, press the {Menu Button} {Copy} {Print}. The Print function can be used only with a USB-type Printer supporting the Post Script (PS). Revision A - 30 - © 2008 eSync Manual © eSync... -
Page 32: Ptz Camera Control
To change focus, use the up and down directional arrow keys. To change the screen split in focus control mode, select {Menu} {Display Setting} and shift to screen split mode. Revision A - 31 - © 2008 eSync Manual © eSync... - Page 33 To deactivate the Tour feature, press the currently enabled tour presets. Controlling the PTZ Speed Adjust the PTZ speed using the Up/Down button. Speed is set between 1 ~ maximum speed. The maximum speed differs for each PTZ model. Revision A - 32 - © 2008 eSync Manual © eSync...
-
Page 34: Chapter 5. System Setup
Figure 5-1. [Figure 5-1. Main Setup Window (Data Mode)] Channel Mode This is a method of setting up the data for all channel numbers based on four channel groups. Revision A - 33 - © 2008 eSync Manual © eSync... -
Page 35: Saving The Recording Settings
Select {Title} for the camera channel using the arrow keys and press the [Select] button. On the selection window, select Covert to hide the camera channel from live view. The video channel will display the eSync Logo with the title “V.C”. Video data will be saved regardless if the covert option is active. - Page 36 To set all channels at the same time, navigate the arrow keys to go to the top of the {Mode} on top of the column and press the [Select] button. Revision A - 35 - © 2008 eSync Manual © eSync...
- Page 37 To set all channels at the same time, navigate the arrow keys to go to the top of the {Audio} on top of the column and press the [Select] button. Revision A - 36 - © 2008 eSync Manual © eSync...
- Page 38 [Select] button. Normal Close (NC): Normally closed; opens when a signal is received Normal Open (NO): Normally open; closes when a signal is received Revision A - 37 - © 2008 eSync Manual © eSync...
- Page 39 To set all channels at the same time, navigate the arrow keys to go to the top of the {POST} on top of the column and press the [Select] button. Revision A - 38 - © 2008 eSync Manual © eSync...
- Page 40 [Select] button. To set all channels at the same time, navigate the arrow keys to go to the top of the {Spot} column and press the [Select] button. Revision A - 39 - © 2008 eSync Manual © eSync...
-
Page 41: Recording Schedule
Presss the [Select] button to change the data profile number. To set the entire column Navigate to the top with the hours with directional arrow keys. Press the [Select] button to change the data profile number. Revision A - 40 - © 2008 eSync Manual © eSync... - Page 42 [Select] button. After setting the holiday, press the [ESC] button followed by the [Save] button at the bottom of the menu. Afterward, press the [Select] button. Revision A - 41 - © 2008 eSync Manual © eSync...
-
Page 43: System
2. {Menu Time Out} To set the automatic menu time out for the system 3. {DVR Name} To name the DVR device. Default is eSync 4. {Remote Controller ID} To name the remote controller for running the system 5. {Date Display Type} To set the date display format 6. - Page 44 On the input window, enter a name using the numeric buttons or the arrow keys and press the [Select] button (the system name may contain up to 20 English characters). Revision A - 43 - © 2008 eSync Manual © eSync...
- Page 45 On the user level setting window, set the user level by using the arrow keys and press the [Select] button as shown in Figure 5-8. [Figure 5-8. User level Setup Window] Revision A - 44 - © 2008 eSync Manual © eSync...
- Page 46 Select {Reset} using the arrow keys and press the [Select] button. When prompted whether to reset all setting, select [Yes]. The factory setup will restore all the settings to Factory Default, excluding any Firmware updates. Revision A - 45 - © 2008 eSync Manual © eSync...
- Page 47 On the input window, enter the ID (between 1 and 255) using the numeric buttons or arrow keys and press the [Select] button. Save After changing the setting in the {System} menu, save the changes. After completing the system setting, select {Menu} {Save}. Revision A - 46 - © 2008 eSync Manual © eSync...
-
Page 48: Storage
If the hard disk space has been used up, the DVR will stop recording. C) Selecting the Manage Local Storage Menu Select {Local Storage Management} using the arrow keys and press the [Select] button. Local storage types include {Direct}, {Backup}, and {New}. Revision A - 47 - © 2008 eSync Manual © eSync... - Page 49 D) Maintenance of the local storage device A local storage device refers to any storage device(s) connected to the eSync DVR, such as the internal hard disk drive(s), USB2.0 device(s), and other device(s) connected to the IEEE1394 port. Local storage types include {New}, {Direct}, and {Backup}.
- Page 50 Select the storage by using the [Select] button. Popup menu will be displayed (Direct-Init / Backup-Init) Select menus using the arrow keys and press the [Select] button. Revision A - 49 - © 2008 eSync Manual © eSync...
- Page 51 Select {Overwrite} using the arrow keys and press the [Select] button. On the selection window, select whether to use this function or not using the arrow keys and press the [Select] button. Revision A - 50 - © 2008 eSync Manual © eSync...
-
Page 52: Ntp
If synchronization with the NTP server fails, synchronization with RTC will be established. Daylight saving time (DST) setup DST is automatically processed according to the time schedule set by the user. User time setup The user can set the time manually. Revision A - 51 - © 2008 eSync Manual © eSync... - Page 53 On the selection window, select [On] or [Off] to enable or disable the DST feature. Start and End Time can be changed manually. After the DST is selected, the existing data will be displayed as “OLD_” in the search and log list. Revision A - 52 - © 2008 eSync Manual © eSync...
-
Page 54: Application Setup
Set to RS-485 only Baud Rate Communication speed Preset Duration Time interval between the presets while on Tour mode Tour Sets the Tour feature (Tour 1 and Tour 2) Revision A - 53 - © 2008 eSync Manual © eSync... - Page 55 Set the interval time per preset in tour mode (select between 5 and 60 seconds) Tour Setup Enable Tour mode, Tour 1 is set to preset 9, and Tour 2 is set to preset 0. Revision A - 54 - © 2008 eSync Manual © eSync...
-
Page 56: Network Setup
To use this feature, the Call or Mail Alarm must be turned ON in {Main Setup} {Data Setup}. Select {Alarm} by using the arrow keys and press the [Select] button. Enter the information on the window to receive email notifications. Revision A - 55 - © 2008 eSync Manual © eSync... - Page 57 Enter the port number and save it using the arrow keys and press the [Select] button. DDNS The default value is set to eSync DDNS server. Select {DDNS} using the arrow keys and press the [Select] button. In order to use DynDNS, the user is required to register through DynDNS, and enter the account information.
Need help?
Do you have a question about the SSA-0424e and is the answer not in the manual?
Questions and answers