Page 3
SIRE MULTI-FUNCTIONAL ROBOT Manual Contents Unpacking SIRE Recharging Internal Battery Power Up SIRE Operation Specifications...
Page 4
SIRE UNPACKING OPERATION AND SUPPORT PUBLICATION » Unpacking the SIRE: The SIRE’s four wheels and fuse are packed separately. To prepare the SIRE for use: • Install the four wheels by allowing the magnets to snap the wheel in place.
Page 5
OPERATION AND SUPPORT PUBLICATION » Recharging Interal Battery: BATTERY CHARGING PORT • Plug the supplied battery charger into the SIRE’s Battery Port. • Plug the battery charger into an AC outlet. • Three red LEDs on the charger should turn on, indicating the battery is being charged.
Page 6
SIRE POWER UP OPERATION AND SUPPORT PUBLICATION The SIRE is powered by an internal rechargable 11.1V Lithium Polymer battery. The SIRE Hand Controller is powered by two 1.5-Volt Alkaline (AA) batteries. The diagrams on the following pages demonstrate proper battery installation and power-up for the SIRE and SIRE Controller.
Page 7
OPERATION AND SUPPORT PUBLICATION » Pairing the SIRE to Hand Contoller: LINK LED 1. Once the SIRE is powered ON, the Link LED will flash rapidly, indicating the SIRE is ready to be paired to a Hand Controller. 2. Once the Hand Controller is powered ON, the Link LED will flash rapidly, indicating the Hand Controller is attempting to pair to any “open”...
Page 8
• Pushing the joystick directly to the left or right will perform a 0-radius turn in that direction. » Visible Light LED: • To turn on the SIRE’s visible light, briefly press the Visible Light button on the Hand Controller. • The Visible Light LED indicator on the Hand Controller will blink blue occasionally to indicate the visible light is on.