Function Description; Picture Menu - SONIQ E40V14B Instruction Manual

Function Description

Picture Menu

Press MENU button to display the main menu.
Press OK button select Picture in the main menu. then press OK button to enter
1.Press UP/DOWN button to select the option that you want to adjust in the Picture menu .
2.Press OK button to enter , then press UP/DOWN button to adjust.
3.After finishing your adjustments, Press MENU/OK button to save and return back to the
previous menu.
Picture Mode
Available Picture Mode: Dynamic, standard, mild, user
Note: You can press P.MODE button to change the Picture Mode directly .
Brightness/Contrast/sharpness /Color/Tint
The above function can only be adjusted when you setting picture mode in user pattern.
Brightness Adjust the optical fiber output of the entire picture, it will effect the dark
region of the picture.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Sharpness Adjust the peaking in the detail of the picture.
Color Adjust the color of the color based on your own like .
Tint It is not available unless Picture Mode is set to be user and the current TV
system is NTST.
Color Temperature
Chang the overall color cast of the picture.
Aspect Ratio
Change the overall color cast of the picture .
Note: You can press ASPECT button to change the Picture Mode directly.
Noise Reduction
Noise reduction of the picture .To reduce noise and improve the appearance of the
picture. No noise reduction operation if it's "off" .
From Low- Middle- High, noise reduction effects better but it will cause a blur on picture.
-9-