Auto Power On; Source; Auto Power Off - ViewSonic PJD5150 User Manual

SOURCE

Quick Auto Search
Automatically scan through all the input source if the function in the OSD menu is On.
The function will stop the signal auto scan process and fix the signal source you
preferred if you turn Off the Quick Auto Search.
3D Settings
This projector features a 3D function which enables you to enjoy the 3D movies, vid-
eos, and sporting events in a more realistic way by presenting the depth of the
images. You need to wear a pair of 3D glasses to view the 3D images.
3D Sync
When you discover the inversion of the image depth, enable this function to correct
the problem.
3D Sync Invert
When you discover the inversion of the image depth, enable this function to correct
the problem.

Auto Power On

Computer
Selecting Enable the projector will turn on automatically when COMPUTER signal is
detected.
Direct Power On
Selecting On the projector will turn on automatically after the power cord has been
connected and power has been applied.

Auto Power Off

Power Saving
The projector lowers the projector power if no input source is detected after 5 minutes
to prevent unnecessary waste of lamp life. You can further decide if you would like the
projector to turn off automatically after a set period of time.
When Disable is selected, the projector power will be reduced to 30% after no signal
is detected for 5 minutes.
If you select 10 min, 20 min or 30 min, the projecter power will be reduced to 30%
after no signal is detected for 5 minutes. And when 10 min, 20 min or 30 min is up,
the projector will turn off automatically.
Sleep Timer
This function allows the projector to turn off automatically after a set period of time to
prevent unnecessary waste of lamp life.
Smart Restart
It takes some time to initate this function. Make sure the projector has been turned on
for more than 4 minutes. If the projector is resumed by using the Smart Restart fea-
ture, this function can be executed immediately.
31