Asotel VC-M S User Manual

Vdsl cpe converter

Advertisement

Quick Links

VDSL CPE CONVERTER
USER'S MANUAL VER. A.5
VDSL CPE CONVERTER USER'S MANUAL
VDSL Solution
The VDSL (Very High Data Rate DSL) networking solution delivers
cost-effective, high-performance broadband access to multiunit buildings
(hotels, apartment, and multi-tenant unit office buildings) and enterprise
campus environments such as manufacturing, educational campuses, and
medical facilities. VDSL technology dramatically extends Ethernet over
existing Category 1/2/3 wiring at speeds 10Mbps (full duplex) and distances
up to 1200 meters. The VDSL technology delivers broadband service on
the same lines as Plain Old Telephone Service (POTS), digital telephone,
and ISDN system. In addition, VDSL supports modes compatible with
asymmetric digital subscriber line (ADSL), allowing service providers to
provision VDSL to buildings where broadband services already exist.
The VDSL solution includes VDSL Concentrator (VDSL switches), and
VDSL Modem for Customer Premise Equipment (CPE) device.
The VDSL solution delivers everything needed to quickly deploy an
Ethernet-based network with the performance required to deliver
high-speed Internet access at much greater distances and drive services
like IP telephony and audio/video streaming. With this technology, a broad
range of customers can benefit from lower operating costs and rapid
deployment. The VDSL solution provides multicast, Layer 2 quality of
service (QOS), Link Aggregation (LACP) dynamic trunking group, security,
GVRP, IGMP for VOD (Video on demand) and SNMP RMON management
and Web-based Switch network management.
The VDSL Concentrator is a bridge between external Internet backbone
through a router for IP sharing and the building 110D telephone rack or
telephone box.
It utilizes the available telephone wire to enable
high-speed Internet access to building residents.
The Concentrator uses the phone line networking technology endorsed by
the VDSL, and the Concentrator utilizes the already existing telephone wire
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VC-M S and is the answer not in the manual?

Questions and answers

Summary of Contents for Asotel VC-M S

  • Page 1 VDSL CPE CONVERTER USER’S MANUAL VER. A.5 VDSL CPE CONVERTER USER’S MANUAL VDSL Solution The VDSL (Very High Data Rate DSL) networking solution delivers cost-effective, high-performance broadband access to multiunit buildings (hotels, apartment, and multi-tenant unit office buildings) and enterprise campus environments such as manufacturing, educational campuses, and medical facilities.
  • Page 2 VDSL CPE CONVERTER USER’S MANUAL VER. A.5 to deliver 10 Mbps Internet access on each RJ-11 port. This gives users a low-cost, end-to-end solution and eliminates the need to train installation teams on multiple systems. Foreword The VDSL Converter is an Ethernet to VDSL adapter that enables high speed internet access to building residents, campuses students and hotel guests by connecting Ehternet equipped computers, set-top box or any internet access device to the existing telephone wires.
  • Page 3: Table Of Contents

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Converter Contents 1. Unpacking Information Check List-----------------------------------------------------4 2. Installation Hardware Installation---------------------------------------5 Pre-Installation Requirements ---------------------------5 General Rules------------------------------------------------6 Connecting the Converter---------------------------------6 Connecting the RJ-11/RJ-45 Ports --------------------------7 2. Hardware Description Front Indicators ----------------------------------------------9 Rear Connectors --------------------------------------------11 Power On------------------------------------------------------11 4.
  • Page 4: Unpacking Information

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 1. Unpacking Information Check List Carefully unpack the package and check its contents against the checklist. Package Contents Ethernet to VDSL Converter Four plastic feet Diskette User Manual AC to DC Power Adapter Ethernet Straight-through cable RJ-11 cable Please inform your dealer immediately for any missing, or damaged...
  • Page 5: Hardware Installation

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 2. Installing the Converter Hardware Installation This chapter describes how to install the converter and establishes network connections. You may install the converter on any level surface (e.q, a table or shelf). However, please take note of the following minimum site requirements before you begin.
  • Page 6: General Rules

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 General Rules Before making any connections to the converter, note the following rules: Ethernet Port (RJ-45) All network connections to the Converter Ethernet port must be made using Category 5 UTP for 100Mbps; Category 3,4 UTP for 10Mbps No more than 100 meters of cabling may be use between the MUX or HUB and an end node.
  • Page 7: Connecting The Rj-11/Rj-45 Ports

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Connecting the RJ-11/RJ-45 Ports 1. The Converter’s RJ-11 ports support the transmission of data up to 10Mbps across existing phone wiring, without interfering with standard voice transmissions, easy-to-use does not require the installation of any additional wiring. Every RJ-11 modular phone jack in the home can become a port on the LAN.
  • Page 8 VDSL CPE CONVERTER USER’S MANUAL VER. A.5 1. The RJ-11 port support 10 Mbps connections. When inserting a RJ-11 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. 2. Do not plug a RJ-11 phone jack connector into the Ethernet port (RJ-45 port).
  • Page 9: Hardware Description

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 3 Hardware Description This section describes the important parts of the converter. It features the front indicators and rear connectors. 3.1 Front Indicators The following figure shows the front panel. Figure Chapter 2.2 Front Indicators Three LED indicators.
  • Page 10: Leds Status

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Front Indicators LED Description and Operation The Converter has three LED indicators. LEDs Status Descriptions It will light up (ON) to show that the Ready Steady product is power good, and system reset (Ready LED) Green Each RJ45 station port on the Ethernet is...
  • Page 11: Rear Connectors

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Rear Panel The following figure shows the rear connectors Figure Chapter 2.3 Rear Connectors Converter Rear Side Connectors _____________________________________________________ Connectors Description Type Line For connecting to the RJ-11 wall jack RJ-11 Using a RJ-11 cable Phone For connecting to the telephone or Fax RJ-11...
  • Page 12: Applications

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 3.Applications APPLICATION FOR HOME NETWORKING The 10Mbps Converter is used to connect any device equipped with a standard 10/100Mbps Ethernet port to a VDSL LAN. The Converter have been designed to operate on the telephone wire installed in homes throughout the world.
  • Page 13: Appendix A Cable Requirement

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Appendix A: Cable Requirements A CAT 3,4 or 5 UTP (unshielded twisted pair) cable is typically used To connect the Ethernet device to the converter. A 10Base-T cable often consists of four pairs of wires, two of which are used for transmission.
  • Page 14 VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Standard telephone wire of any gauge or type-flat, twisted or quad is used to connect the Converter to the telephone network. A telephone cable typically consists of three pairs of wires, one of which is used for transmission.
  • Page 15: Appendix B Product Specifications

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Appendix B: Product Specification Product Name:VDSL To Ethernet Converter (VDSL Modem) Application: Home networking solution Product Specification: Compliant with IEEE 802.3 & 802.3u Ethernet Standards Compliant with ETSI, ITU, ANSI VDSL standards 10/100M auto-sensing RJ-45 Ethernet ports x 1 10Mbps VDSL RJ-11 port x 1 POTS / ISDN Splitter port RJ-11 x 1 Splitter on board...
  • Page 16: Appendix C Trouble Shooting

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Appendix C: Troubleshooting Diagnosing the Converter’s Indicators The Converter can be easily monitored through its comprehensive panel indicators. These indicators assist the network manager in identifying problems the hub may encounter. This section describes common problems you may encounter and possible solutions 1.
  • Page 17 VDSL CPE CONVERTER USER’S MANUAL VER. A.5 System Diagnostics Power and Cooling Problems If the POWER indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, power cord, or internal power supply as explained in the previous section. However, if the unit power is off after running for a while, check for loose power connections, power losses or surges at the power outlet, and verify that the fan on back of the unit is unobstructed and running...
  • Page 18: Physical Configuration

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 to the wrong mode) whenever the attached device is reset or experiences a power fluctuation. The best way to resolve this problem is to upgrade these devices to a version that support Ethernet and VDSL.
  • Page 19: Appendix D Link Recover Procedure

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Appendix D:Link Recover Procedures Operating Procedures: 1. Power on VDSL CO, start the speed change program, change speed mode to 4/1Mbps. 2. Connect phone line between VDSL CO & VDSL CPE. 3. Push still Link Recover Button of VDSL CPE and power on VDSL CPE. 4.
  • Page 20: Appendix E Accessories-Bracket

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Appendix E:Accessories-Bracket Two Brackets The brackets are specially designed to fix the VDSL converter on the table to avoid someone to freely take it away, like in hotel rooms, internet café or other public areas where providing the internet service. It is suggested to use with the wooden table.
  • Page 21: Appendix E Compliant And Safety Information

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Appendix F:Compliance and Safety Information FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a computing device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 22: Important Safety Instructions

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 If this telephone equipment causes harm to the telephone network, the telephone company will notify advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible.
  • Page 23: Fcc/Ce Warning

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 24: Warranty

    VDSL CPE CONVERTER USER’S MANUAL VER. A.5 Warranty The original owner that the product delivered in this package will be free from defects in material and workmanship for one year parts after purchase. For the warranty to apply, you must register your purchase by returning the registration card indicating the date of purchase.

Table of Contents