SAFETY REQUIREMENTS: ACTIVE SUSPENSION WITH VARIABLE DAMPING
All operations on the hydraulic suspension circuit must be performed in conformity with the following requirements and regulations:
Authorities competent in matters of health:
- Accident prevention.
- Environmental protection.
WARNING: Operations should be carried out by specialised personnel who have had training in the safety requirements and precautions to
be taken.
Safety requirements.
ESSENTIAL: In view of the special features of the hydraulic suspension system, observe the requirements below, before undertaking any
repair.
IMPERATIVE: Depending on the operation to be carried out, respect the requirements for supporting and securing the vehicle.
Wheels hanging
2-column lift or secure the
vehicle on 4 axle stands
Vehicle on the ground
Depressurisation of the circuit
(see corresponding operation)
Wheels not hanging
Vehicle on 4-column lift
Checking and adjusting of
heights (switch on ignition)
195
Other operations
(depressurisation of the
hydraulic circuit)