Dension Blueway BWY-9201-1 General Installation Manuallines

Blueway
General installation guide
BWY-9201-1
1. Introduction
The Dension Blueway lets you connect your smartphone or iPhone to
your original car radio, providing music playback, menu based control
(AVRCP 1.4 is necessary) through Bluetooth. The Blueway offers
Bluetooth connectivity for music streaming (via A2DP with full menu
browsing) and handsfree mobile call handling via the original buttons
and screens of your vehicle. Gives you the possibility to connect two
Bluetooth devices at the same time.
Package content:
• Blueway interface
• Car side harness (power cable included)
• Microphone (generic)
• Zip tie
Optional accessories:
• Car specifi c microphones
• Cigar Lighter Charger (BLR1CLO)
• USB extension cable (USB2000)
2. Getting started
At fi rst, please make sure that the vehicle compatibility is correct. The
Blueway is available in specifi c versions for different vehicle types,
therefore the exact operation and installation may be different in each
case.
Before you start!
During the installation always make sure that the ignition key
is removed from the car, the radio is switched off and that
you have the security code of the head unit (radio) available
(if applicable).
Remove the head unit
First, carefully remove your vehicle's existing factory fi tted head unit
according to the factory instructions and using the correct tools. In
some cases, removing the head unit will also require panel removal.
Contact your vehicle's dealer or a Dension authorized installer/supplier
for more information.
3. Fitting the Blueway harness
Once the head unit has been removed, disconnect the antenna cable
(1), then unclip the main wiring connector from the head unit (2). This
will differ in all makes and manufacturers.
With the main radio cable removed, connect the Dension supplied
cable between the original factory cable harness and the head unit.
4. Installation
Connect the 18 way micro-fi t to the vehicle side of the Blueway
device.
Please note: In most cases, the factory media and factory phone
devices are needed to be removed.
For the easier update of the device in the future we recommend
placing the hardware to a location where you can easily reach it or
extend the USB port with an extension cable, which is available as an
offi cial Dension accessory (USB2000).
Fitting the microphone
The microphone will work best when it is kept away from all noise
sources (open windows or speakers) and close to the driver. So the
best place to ensure perfect sound is to install at the central interior
light or rear view mirror in the centre of the wind screen. There are
clips that help you mounting the microphone. The optimal place for
the microphone depends on many factors, so it is recommended that
you try different installation places before fi nalizing the microphone
installation.
5. Test and refi t
Before you refi t the head unit, test the Blueway with your car audio,
making sure all connections are correct and that you have full
functionality.
Note: If during testing you notice any changes or inconsistencies
in the way the car's electrical system operates, disconnect the
Blueway product immediately and consult your dealer.
When you have tested everything, refi t your head unit. Do not trap
the cables, or leave them in a position where they may become
trapped after refi tting the head unit. We supply cable ties to mount
the Blueway module. Please mount the module away from heat or
damp surfaces.
Refi t is the reversal of the removal process for your specifi c vehicle,
as per your manufacturer's instructions.
6. Enabling
On CAN BAP based systems (like RCD310, RCD510 or RNS510)
Blueway emulates the factory MDI (Multimedia Interface) and
telephone option which needs to be coded since Model Year 2011. If
your vehicle has not been programmed before, the Media Player 3
(2E) and Telephone (7E) options have to be coded in order for the
Blueway to work correctly.
Please note: Programming is not required if your vehicle had those
options enabled before.
7. Disclaimer
If your car's electrical system begins to behave in an unpredictable
way please disconnect the Blueway interface physically immediately
and have it checked by your installer. Dension and its authorized
distributors and retailers are not liable for any incidental consequential
or indirect damages or loss and do not assume liability for any
diagnostic fees. The use of handheld devices while driving maybe
subject to government legislation. Please ensure that your use of
the Dension device complies with applicable traffi c laws. Dension
does not assume liability for any events resulting from the illegal or
irresponsible use of handheld devices while driving.
Dension reserves the right to modify its products or specifi cations
without prior notice.
8. Warranty
Dension devices carry a one-year limited warranty that protects
you from defects in material and workmanship of products sold by
Dension or its authorized distributors and retailers. Dension does
not warrant any installation work or assume liability for any damage
caused due to negligence, improper installation or operation. For
warranty claims, proof of purchase is required.
9. Update and support
If you need further assistance in using your Dension product, please
contact your local supplier or visit our website at
www.dension.com. You can ask for the help of our trained technicians
through the channels described on our Support page. Please check
the download section for the latest fi rmware version and product
documentation, as these may provide additional features or easier use
of the product.