Advertisement
Blueway
General user guide
BWY-9202-2
1. Introduction
The Dension Blueway lets you connect your smartphone or iPhone to
your original car radio, providing music playback, menu based control
(AVRCP 1.4 is necessary) through Bluetooth. The Blueway offers
Bluetooth connectivity for music streaming (via A2DP with full menu
browsing) and handsfree mobile call handling via the original buttons
and screens of your vehicle. Gives you the possibility to connect two
Bluetooth devices at the same time.
2. Supported devices
The Dension Blueway has a built in Bluetooth 3.0 module which
supports:
•
HF (Handsfree) v1.6
•
A2DP (Audio)
•
AVRCP (Audio remote) v1.5
•
PBAP (Phonebook access)
It means it can work with most mobile phones and Bluetooth devices
which support the same standards.
3. Bluetooth pairing
You can pair up to 5 phones to the Blueway and two phones can be
used for hands free and Bluetooth audio at the same time.
The order of the fi rst pairing is important because the Blueway will
start to connect the fi rstly to the phone which can be found on the top
of the paired phone list. Than it will continue until it has successfully
connected to two devices or reached the end of the list.
The phone which will be found fi rst will be the primary phone (marked
with 1). The following connected device will be the secondary phone
(marked with 2). If you would like to change the order of the devices,
you need to delete the pairing history in the menu of the Blueway and
do the pairing again starting with the phone which you would like to
use as the primary phone.
To see the feature differences between the primary and secondary
phones, please check this chart:
4. DIP switches
With the DIP switches which can be found on the bottom of the
Blueway, you can activate or deactivate Bluetooth options. Turn OFF
the 5th DIP switch in order to disable the phone functionality. This
is important if you would like to keep the factory phone module and
would like to use it together with the Blueway.
By switching DIP 6 into OFF position, you can turn the media functions
OFF. Do this, if you would like to keep the factory MDI and would like
to use the Blueway only for hands free.
5. Volkswagen BAP
Accessing Menu:
Turn on the radio of your car and select 'Media in' by pressing the
Media button. Pair your phone/phones with the Blueway. It will start to
play the music content of your phone automatically.
On the main menu of the device, you can fi nd the next options:
Source: In this menu you can select which one of the connected
phones you would like to use for music streaming.
Music: Here you can browse the content of your phone through the
Bluetooth connection.
Paired phones: In this menu, you can see all paired devices and you
can fi nd an option to delete the pairing history of the device.
If you select the name of a connected device, you can disconnect that
from the Blueway. If you would like to connect a phone which was
out of range or its Bluetooth was turned off at the initial scanning,
you can connect it by selecting the name of that device in this menu.
The primary phone is marked with "1", the secondary phone is
marked with "2" before the name of the device.
Settings: In this menu, you can fi nd the following options:
•
Volume: You can change the output volume level and can
modify the sensitivity of the microphone
•
Language: You can change the language of the menu of the
Blueway. Supported languages are: EN, DE, FR, IT, NL, ES, PT,
TR, HU, PL, CZ, SK, RO
•
Phonebook: Allows you to turn the phonebook synchronization
of your primary phone ON or OFF.
•
Mobile phone ringtone: Here you can select between the
own ringtone of the phone and the three built in ringtones of
the Blueway. (Please note: original ringtone support depends
on the connected device)
•
About: In this menu you can check the current fi rmware
version of the Blueway
When you start the car, the Blueway will start to play the music
content of the primary phone automatically. After connecting the
primary phone, in the next 30 seconds, it will switch to the secondary
phone automatically if any sound will be sent from that phone
through Bluetooth.
Selecting the Music Source:
You can select the music source for playback in the Source Menu. In
this menu, you see the name of the two connected Bluetooth devices.
Browsing in the Music menu:
You can use the Music menu to list the music content of the device
which is selected in the source menu. The structure and language of
this menu is phone dependent.
In case of Apple iPhone, the factory music player need to run in the
background of the phone in order to brows the music content.
If the Application is not active you can get only limited controls
through the Blueway.
Using the phone menu:
You can enter the phone menu by pressing OK on the steering wheel
after you switched to the phone screen on the cluster display or by
pressing the phone button on the radio. After you enter the phone
menu, you see the following options:
•
Phonebook: here you can see the phonebook of the primary
phone. You can select a phone number from your address
book to initiate a call. Contacts are shown in alphabetical
order, grouped by the fi rst letters of the surnames.
Synchronization is possible up to 1500 phone numbers.
•
Received / Missed / Dialled call: Provide access to the
respective call logs.
•
Disconnect: Disconnect the paired phone.
Receiving and making phone calls: When receiving an incoming
call, the caller number or the corresponding contact name in your
phonebook is displayed from both connected mobile phones. You can
answer the call by pressing the Phone button on the steering wheel
or by pressing the relevant touch screen button on the head unit. The
music or radio gets muted and the audio of the call is directed to the
speakers.
You can reject an incoming call by a long press of the Phone button,
with the "OK" button on the steering wheel or by touching the red
hang-up icon on the head unit.
To start a call from the primary phone, please select the phone
number or contact from the Phonebook or from the call logs in the
Phone menu and press the relevant touch screen button.
To make call from the secondary phone, you need to use the controls
on the phone.
You can hang up an ongoing call in both cases by pressing the Phone
button or the "OK" button on the steering wheel or the relevant touch
screen button.
Please note: The system can control only one active hands free call
at a time (because of the limitation of the standard head units). To
avoid malfunctions, if there is an ongoing call on one of the connected
devices the Blueway will not handle phone calls from the other
connected phone. It means if there are two calls at the same time,
than the second one needs to be handled by the original controls of
the phone.
6. USB port functions
Non-charging version: The USB port can only be used for updating
the fi rmware of the Blueway.
Smart charging version: It allows you to charge your phone in an
adaptive (smart) way. It communicates with the phone to defi ne the
optimal charging value. This communication process takes about a
minute, and the charging starts subsequently.
7. Disclaimer
If your car's electrical system begins to behave in an unpredictable way
please immediately diconnect the Blueway device physically and have
it checked by your installer or an automotive electronics professional.
Dension and its authorized distributors and retailers are not liable for
any incidental consequential or indirect damages or loss and do not
assume liability for any diagnostic fees.
The use of handheld devices while driving may be subject to
government legislation. Please ensure that your use of the Dension
device complies with applicable traffi c laws. Dension does not assume
liability for any events resulting from the illegal or irresponsible use
of handheld devices during the driving. Dension reserves the right to
modify its products or specifi cations without prior notice.
8. Warranty
Dension devices carry a one-year limited warranty that protects
you from defects in material and workmanship of products sold by
Dension or its authorized distributors and retailers. Dension does
not warrant any installation work or assume liability for any damage
caused due to negligence, improper installation or operation. For
warranty claims, proof of purchase is required.
9. Update and support
If you need further assistance in using your Blueway, please
contact your local supplier or visit www.dension.com. Please check
the support section for the latest fi rmware version and product
documentation of your device.
Advertisement
